onebadmk8
Well-Known Member
Caps that is. What is the correct steel wheel and cap for 68? Thanks in advance.
Want to go Poverty . . .
- Thread starter onebadmk8
- Start date
69 Runner
ADMIN wif a corner office (Deceased - RIP)
14" with 3 bumps unless a Hemi. Then it would be a 15" with 3 bumps
69 Runner
ADMIN wif a corner office (Deceased - RIP)
huh?????????????????
383man
Well-Known Member
A guy on Moparts did some photoshop work on a pic of my 63 as I am thinking of going to the poverty caps. So he gave a me a few different looks with them on this link. Ron
http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Board=Test&Number=4568366&page=1&fpart=all
http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Board=Test&Number=4568366&page=1&fpart=all
69 Runner
ADMIN wif a corner office (Deceased - RIP)
As far as I know, all the poverty caps were the same diameter.
Plymouthfan
Well-Known Member
- Local time
- 10:06 AM
- Joined
- Jul 17, 2008
- Messages
- 66
- Reaction score
- 0
- Location
- Corner of Filth & Squaller
Go poverty!
onebadmk8
Well-Known Member
Link doesnt work. I would want 15's for sure.
yellow68runner
Well-Known Member
dog dish for 68's
these are the correct HUB caps,they also had a full wheel cover and a magnum 500 option
View attachment 325902
these are the correct HUB caps,they also had a full wheel cover and a magnum 500 option
View attachment 325902
69 Runner
ADMIN wif a corner office (Deceased - RIP)
Plymouthfan
Well-Known Member
- Local time
- 10:06 AM
- Joined
- Jul 17, 2008
- Messages
- 66
- Reaction score
- 0
- Location
- Corner of Filth & Squaller
onebadmk8
Well-Known Member
This is what I want exactly!! Where to get and how much??$?$?
GTXperience
Well-Known Member
- Local time
- 7:06 AM
- Joined
- Jul 18, 2008
- Messages
- 1,815
- Reaction score
- 568
- Location
- Sacramento Area, CA
onebad, do you want the correct wheels for a '68 or are leaning towards the Plymouth Division dog dishes? Either way, I have both sets if interested.
onebadmk8
Well-Known Member
Whatever is on the red car. How much?$$$
rolling_Thunder
Well-Known Member
BE and A Parts sells complete sets of new Stainless Steel ones for $325.00
Yuri
Active Member
I found my Plymouth division dog dishes at a mopar swap meet for $80 for the set.
There are still some good deals out there.
There are still some good deals out there.
Plymouthfan
Well-Known Member
- Local time
- 10:06 AM
- Joined
- Jul 17, 2008
- Messages
- 66
- Reaction score
- 0
- Location
- Corner of Filth & Squaller
GTXperience
Well-Known Member
- Local time
- 7:06 AM
- Joined
- Jul 18, 2008
- Messages
- 1,815
- Reaction score
- 568
- Location
- Sacramento Area, CA
onebad, pm sent.
Alaskan_TA
Active Member
Adam is right, there are two different sizes, they will not interchange - you need the right year wheels too. The newer dog dish caps are smaller, 9" across the back.
1968 Dodge caps;
http://www.hamtramck-historical.com/images/dealerships/DealershipDataBook/1968/68_Coronet0014.jpg
1969 Dodge caps;
http://www.hamtramck-historical.com/images/dealerships/DealershipDataBook/1969/69_Coronet0012.jpg
1968 Dodge caps;
http://www.hamtramck-historical.com/images/dealerships/DealershipDataBook/1968/68_Coronet0014.jpg
1969 Dodge caps;
http://www.hamtramck-historical.com/images/dealerships/DealershipDataBook/1969/69_Coronet0012.jpg
onebadmk8
Well-Known Member
Thanks for the info guys.
Similar threads
