Who has my manual?

[69 Runner]

I can't find it, and I need to look up the torque spec for the rocker shafts and balancer bolt.

so who took it and why:edgy:
:rolling:

 

[GTXperience]

Sorry, here it is. I was using it to hold the door open. ;)

 

[69 Runner]

damnit man...

ok

.....well


..................look that stuff up for me will ya?

 

[generaljmwlee]

just torqued my rockershafts it call for 25 ft pounds

 

[fly12]

i don't know ....

 

[74sundance]

I can't find it, and I need to look up the torque spec for the rocker shafts and balancer bolt.

so who took it and why:edgy:
:rolling:

Rocker shafts:
25 Ft-Lbs
300 In-Lbs
33.9 N-m

Balancer bolt:
135 Ft-Lbs
1620 In-Lbs
183.04 N-m

If you need more try the link out:
http://www.torkspec.com/torkspecme.aspx?KI=7

 

[Al K]

74Sundance;thanks for the link!:yes:

 

[69 Runner]

Well....(and this is a true story btw) first I found the manual I got with the 68 Coronet R/T I used to own. So I was installing the clutch and wanted to look to see if there was a torque spec for the clutch plate. Well, in that book the clutch is covered in "Group 10"....

which was missing from that manual Yes, that book had lead a hard life before I got it.

Long story short (yeahyeah I know....to late for that) I found my 70 book yesterday:HappyNewYear:

 

[74sundance]

74Sundance;thanks for the link!:yes:

No problem,I had a much better link but can't seem to find it now but you can bet I'll post it when I do find it.

 

[69 Runner]

It's probably in the same place my manual was

 

[74sundance]

Ha it could be

Still not the link I was looking for but this one is much better to read and shows all motors on one page,just scroll down to find yours.

http://www.mymopar.com/torquespecs.htm

 

[74sundance]

Found it

http://www.boxwrench.net/

http://www.boxwrench.net/specs/bchrys_B.htm