wiring tool needed

[dart6]

looking for the tool that allows you to remove the wires from the termination blocks and switches on our mopars thx

 

[rolling_Thunder]

I made my own... I took a small flat blade screw driver, gave it a slight bend at the tip, and ground it down narrow - slide it in and it takes allows your to remove the terminals.

 

[Slantsixdan]

You are looking for a "Terminal Extractor Pick" such as Belden 725169 available at NAPA, or Standard (Ignition) # WTT15.

 

[hunt2elk]

Here is another option.

 

[bigmanjbmopar]

On the cheap a very small flat blade screw driver works. Look for the locking tabs and press them in and pull at the same time.

 

[dart6]

great replies here thx guys