Ut oh, you got color and wheels on the car Randy - you know what that means?
Time for hyperdrive! Go Randy Go!!
Time for hyperdrive! Go Randy Go!!
Is there any sense in wire brushing those manifolds down and painting them? Wont it just burn off anyway?
Just don't bake them in the kitchen in YOUR house.....I did that with my brake drums years ago, and my Mrs hit the roof.I've use Seymour high-heat paint with great results.
[/URL]
Though I just noticed it needs to be baked at 400* for 2 hours. I didn't bake it and it still looks great.
I see that you got your Yankee Express fix last night...lol. thanks.Just don't bake them in the kitchen in YOUR house.....I did that with my brake drums years ago, and my Mrs hit the roof.
Smelled like a 747 had just re-fuelled for about a week.
Calyx Manifold Coating 3 ozIs there any sense in wire brushing those manifolds down and painting them? Wont it just burn off anyway?
There's one for that sticking out at the center front of the carb......plus this one is sticking out from the fuel bowl base....I’m not familiar with Holley carbs, but I think the rubber line is for your vacuum advance (brace yourself for the ported vs manifold debate comments lol.)
Well shows what I know about Holleys. I’ve only worked on Carter/Edelbrocks.There's one for that sticking out at the center front of the carb......plus this one is sticking out from the fuel bowl base....
What model carb is that?There's one for that sticking out at the center front of the carb......plus this one is sticking out from the fuel bowl base....
R3310-3 HolleyWhat model carb is that?
Ah, ok.R3310-3 Holley
4160
750 -CFM