Hyd. Flat Tappet Cam Recommendation?

[rumblefish360]

I would say you did what you needed to do and I think you'll be real happy with your choice and results! Have at it and have fun!

 

[67 B-body]

I spoke with two cam manufactures, talked to summit racing, narrowed down my selection to two-three potential camshafts, researched those three camshafts, compared listed specs, and let the desktop dyno give me somewhat of an idea of the power potential of each; then selected the one with the best overall numbers that matched my powerband. I would say this is more that enough homework than is necessary!

You've done your do diligence in selecting the best cam for your application..
I hope it all works well together with the rest of your combination.
You'll have to get a good video of it running so we can here it!:headbang:

 

[rumblefish360]

HEY! What are you sliding in? Give up some info there! Inquiring minds wanna know.

 

[Sweet5ltr]

HEY! What are you sliding in? Give up some info there! Inquiring minds wanna know.

Comp Cams XE285HL. 241/247@.050 (285/297) W/ .545 int/.545 exh lift (1.5R) 110LSA.

 

[67 B-body]

Comp Cams XE285HL. 241/247@.050 (285/297) W/ .545 int/.545 exh lift (1.5R) 110LSA.

Here's another good article / example for you to check out..... Might be useful to help understand a few of the details regarding camshaft timing, LSA, and overlap. Examples can speek volumes sometimes.:headbang:
It didn't come from a dyno room,,,, but its still true......ops:

http://www.compcams.com/Technical/FAQ/LSAproperties.asp