oh no, Bob-o!!! please put that GTX'er back in your avatar!!!
View attachment 199949View attachment 199950
View attachment 199949View attachment 199950
Waking up the beast
- Thread starter bobtile
- Start date
ok
you da man!!!
SUPERSTOCKRACER
Well-Known Member
make sure you rub the fiberglass firmly on your forearm 1st before applying it to the hood.
SUPERSTOCKRACER
Well-Known Member
Think I'm good.
SUPERSTOCKRACER
Well-Known Member
SUPERSTOCKRACER
Well-Known Member
HT413
Semi Pro Bowler
I've met Haitians with better color sense.
- - - Updated - - -
Hey look at the cool toys I picked up from another member. Turns out he's right on the way home from vaca.
- - - Updated - - -
Hey look at the cool toys I picked up from another member. Turns out he's right on the way home from vaca.
67 B-body
Well-Known Member
Very nice!
Nice! You got your deck lid.
HT413
Semi Pro Bowler
He's got another one... new unused!
SUPERSTOCKRACER
Well-Known Member
What company? I need a 65 Plymouth belvedere hood.& a trunk lid
Moparmatt72
Well-Known Member
I love that tall six pack scoop thinking running that on my 72 sat Once I get to that point.
HT413
Semi Pro Bowler
The one I have is Glasstek but he has another from a different mfgr (not sure what maker). It's for a 69 R&R/gtx, it's grey and has a rolled edge, it honestly looked nicer and was much more rigid because of the edge. I personally stayed away because it was so rigid if it didn't for right it never would. I figured the glasstek unit I could manipulate it a bit with fastener placement if needed . He has plenty of other parts as well, runs this wicked 8/9 sec Ray Barton HEMI roadrunner.
I will probably be passing by his area again in a few weeks, so I have no problem picking up parts for you guys and bringing them back to northern NJ. I might even have time for another visit to Island, so possibly could just deliver there.
I was hoping to find this scoop. It was attached to a cuda hood that I paid 20 bucks for at Carlisle.
- - - Updated - - -
Thanks for the offer. I'll take the Barton Hemi.
Hopefully it will look great when it gets finished,
it's a little gaudy yellow right now...LOL...
A little "organsol or semi gloss black" when you get finished will all the prep & fill work
{hopefully you don't add back "too much weight" to the 6bbl scoop/hoods final product...he he ha ha}
are you going to make it functional ram air too ??
good luck, have fun, every little bit helps...
it's a little gaudy yellow right now...LOL...
A little "organsol or semi gloss black" when you get finished will all the prep & fill work
{hopefully you don't add back "too much weight" to the 6bbl scoop/hoods final product...he he ha ha}
are you going to make it functional ram air too ??
good luck, have fun, every little bit helps...
Similar threads
