• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

please help identify this shroud

rbkt65

Well-Known Member
Local time
8:47 PM
Joined
Mar 19, 2011
Messages
438
Reaction score
213
Location
jerseyville,illinois
i have been cleaning out upstairs of garage. i found a 2 piece metal shroud that i don't remember where it came from. i stripped out a 67 coronet 4 door for parts for my 67 500 a long time ago. maybe from it. just need better eyes/mind to take a looksee. it is 22.5 inches wide and bolts together in middle and attachment holes are on the side where it may bolt to core support. would like to know what it might fit. if not a b body i will move it to correct site. thanks in advance.
20200206_142553.jpg
20200206_142100.jpg
20200206_142053.jpg
20200206_142031.jpg
 
thank you very muck. i have had several 65's and 3 66-67's. so it must b off one of them thanks again.
 
Looks like an early B body shroud. There are 4 little offset brackets that bolt to side of shroud and other side goes to the capsulated nuts in the radiator housing itself .
 
thanks again for info. i looked at my 65-68 parts books and found paart numbers 2417423/424. it looks like my pics. i did have a number of 65's . i googled those numbers and boy are they proud of that shroud. anywhere from 195 for upper 1/2, to 308 for repop. again thanks to all for id help.
 
thanks again for info. i looked at my 65-68 parts books and found paart numbers 2417423/424. it looks like my pics. i did have a number of 65's . i googled those numbers and boy are they proud of that shroud. anywhere from 195 for upper 1/2, to 308 for repop. again thanks to all for id help.

Yes they are proud of those parts. Happy to help.

Side note , would you have a hood safety latch for a 64 Polara in your stash that you don't need?
 
Auto Transport Service
Back
Top