417guy
Well-Known Member
Had the front end rebuilt about 1000 miles ago on my 68 road runner. New QA1 tubular upper control arms, bigger tie rods with QA1 solid steel adjusters, Moog LCA bushings, plates welded to the bottom of the LCA’s, and poly strut rod bushings on the OE strut rods. Aligned by an old Mopar master. Drives great !
Now I have a squeak on the driver side. The bushings in the UCA’s were lubed with the red grease I use on everything. (They have grease fittings). I can’t tell where the squeak is exactly. Any one have any experience with this ? Could it be the poly (energy suspension) strut rod bushings ? A little embarrassing when pulling in the the cruise in lot and it sounds like my old Ford, first car at 16.
Just looking for anyone’s input and advice . TIA
Now I have a squeak on the driver side. The bushings in the UCA’s were lubed with the red grease I use on everything. (They have grease fittings). I can’t tell where the squeak is exactly. Any one have any experience with this ? Could it be the poly (energy suspension) strut rod bushings ? A little embarrassing when pulling in the the cruise in lot and it sounds like my old Ford, first car at 16.
Just looking for anyone’s input and advice . TIA