Front End FRIDAY!!!

[dadsbee]

The new Coronet in my life. I think I'll just bondo those holes and paint the grilles balck.



View attachment 1245874 View attachment 1245876

Do it right, back it up with wax paper and use JB Weld's Plastic Mender...

 

[Dave6T4]

View attachment 1245778

I am starting to think the reason that I don't have very many toys is that you've got them all. LOL.

 

[65Bel]

The new Coronet in my life. I think I'll just bondo those holes and paint the grilles balck.



View attachment 1245874 View attachment 1245876

Have had good success with JB PlasticWeld over the years with just that sort of thing. What's good about what you've got there is you can build up some thickness on the backside for reinforcement and it won't be visible when assembled.

 

[FitzyB5]

 

[64BEL]

View attachment 1245906

Is that a car that @Richard Cranium used to own?

 

[440 PHIXX]

 

[SteveSS]

Is there a video or some sort of instructions for doing this JB Weld thing? I don't have the missing pieces they are long gone.

 

[Charles Cook]

 

[Richard Cranium]

Is that a car that @Richard Cranium used to own?

Not me.

 

[FitzyB5]

He’s not the only elevator man here. I’m in my 40th year and still going. Just a little slower than I used to.

 

[jaws]

Is there a video or some sort of instructions for doing this JB Weld thing? I don't have the missing pieces they are long gone.

Just rough up the area, tape some wax paper to the back side. Then tape some card board to the back and fill the front with JB weld plastic repair. Sand filler and paint.

 

[qkcuda]

A day late I know. I dropped the bumper to get at the headlight harnesses without removing the grille so I could install the new relays.

 

[65Bel]

 

[65Bel]

 

[65Bel]

 

[65Bel]

 

[65Bel]

 

[65Bel]

 

[65Bel]

 

[65Bel]