Had a few old bowties including a 57 Chevy Bel Air so was an old habit all with P....I'm posi you will!!I've had a few posi's, just not on a Mopar, I get it!! Fortunately these guys just play, they don't eat their young!!
![]()

Had a few old bowties including a 57 Chevy Bel Air so was an old habit all with P....I'm posi you will!!I've had a few posi's, just not on a Mopar, I get it!! Fortunately these guys just play, they don't eat their young!!
![]()
A lot of friends and I had 55-57 chevys. (I still do). We busted up a lot of those plastic ten bolts, before we stuck something good under em.Had a few old bowties including a 57 Chevy Bel Air so was an old habit all with P....![]()
I've had more rear ends grenade than I care to think about. Then I started buying these. Currie builds a great 12 bolt.A lot of friends and I had 55-57 chevys. (I still do). We busted up a lot of those plastic ten bolts, before we stuck something good under em.
(Hard to believe chevy used the same basic garbage rear end behind 425 horse 409 four speeds!)
That's pretty neat!! I like that!!I hung this carved rootball that I found in the backyard of a rental unit that turned over last month.
View attachment 1866984
It took years to find all the pieces for this, not really looking. The D and the A are one piece. It was hanging over my bar for years. Now it's just on the wall of my shop.I hung this carved rootball that I found in the backyard of a rental unit that turned over last month.
View attachment 1866984
Was a couple hours early for a site visit so I sat in the Battery and watched a guy wash windows .....View attachment 1866920View attachment 1866921View attachment 1866922
I can't give that an "agree".Funk that!!!!!
Haven't started my 71 charger project yet really, but did get tires mounted on rims, walked over to it while on Jack stands and determined it has a 9-1/4 posi, next I'll count rotations and determine gear ratio.
I agree!A lot of friends and I had 55-57 chevys. (I still do). We busted up a lot of those plastic ten bolts, before we stuck something good under em.
(Hard to believe chevy used the same basic garbage rear end behind 425 horse 409 four speeds!)
Never had an 8 3/4 grenade until a buddy and I ran a high 10 second car with a 4 speed in front of it back in 82 lolI've had more rear ends grenade than I care to think about. Then I started buying these. Currie builds a great 12 bolt.
View attachment 1866926View attachment 1866923
75 inside the shop with the front door down and the rear door open.....and 70 under the rear carport just outside the open rear door lol. Feels too cool to be wearing shorts with both front and rear doors open!My 79 300 (Cordoba) had a 9 1/4 3.21 rear also. The are really stout.
Today I read the water meters for our shop plaza at 5 am. My monthly job.
Gonna be a hot one today about 108 degrees.
Gotta start early of you want to get outside work done.
Usually or at least for the last few years hasn't rained this much and been this cool in the middle of June! Needed it since a lot of stuff has been trying to come back from the last several years of dry hot weather.Lucky you. Got at least 5 months of 100+ from now on.
Like they say. "There is no perfect place to live".
I got around to fixing the siding on the house where the bear damaged it. Still haven't seen the bear come back yet. He normally swings by every evening, but I think he knows he messed up and wore out his welcome. I'll have a new bear skin rug if and when he does however. I have better things to do with time than waste it mixing stains and varnishes, cleaning up after a bear.I had a Black Bear tear into the siding of my house last evening. Why, I don't know, but he signed his own death warrant... I'll be waiting for him.
View attachment 1865371
View attachment 1865374
View attachment 1865373
"Gotta start early"My 79 300 (Cordoba) had a 9 1/4 3.21 rear also. The are really stout.
Today I read the water meters for our shop plaza at 5 am. My monthly job.
Gonna be a hot one today about 108 degrees.
Gotta start early of you want to get outside work done.