6 Pac engine tuner/guru

[guy gadbois]

Hello fellow Moparians!!!!
I recently acquired a 69 Road Runner 440 six pac car. Not an A12. I don't know much about the engine, how it was built, it's cam, etc. I would like to take the car to a six pac guru, a master at tuning these engines. Someone that will guide me to get the most from my combination. This is a street car. Suggestions ????
I am in North Carolina but will travel wherever for the right guy.
THX !!!

Automobile Restoration In Talala, Oklahoma | Smothers Supercars

Classic car dreams realized. Smothers Supercars offers expert automobile restoration, engine tuning, and transmission rebuild. Breathe new life into your car with Oklahoma's top choice.

smotherssupercars.com

Wayne seems to know a thing or two

 

[Texas97]

Contact Dave @ Woodruff Carbs, I made him a piece that allows you to tune the outer carbs when they tip in better than just the springs in the diaphrams. you will not be disappointed.

coming back to this again. about to take the plunge on installing my full 6 pack setup. trying to gather all parts, tools and information before going at it.

 

[Bird 426]

I have never had to remove an end carb to remove the center carb .

 

[69ChargerR/TSE]

coming back to this again. about to take the plunge on installing my full 6 pack setup. trying to gather all parts, tools and information before going at it.

I’m waiting for my carbs to be done. I still need kick down linkage.

 

[66 Cornpicker]

Texas97, No it's not a tool, You can use your carbs without this piece in place but I guarantee that the piece will make your six pac work and tune in better. Dave is the man @ Woodruff !

 

[Texas97]

Texas97, No it's not a tool, You can use your carbs without this piece in place but I guarantee that the piece will make your six pac work and tune in better. Dave is the man @ Woodruff !

guess i need to call Woodruff and discuss it. i already have a Promax metering plate