ragtp66
Active Member
Hello
Please help I am helping a buddy working on a 66 charger with a 68 318LA & 727 torqueflight transmission. I am looking for the BLACK metal "flag clip" that is shown in the attached picture. It holds the kickdown rod into the arm at the transmission on this rod there is no hole for a hairpin clip or cotter pin so I assume it must use this type of setup.
Second issue in same general area where the actual shift lever for PRND21 attaches there is a lock swivel nut that the previous owner just rigged up with some wire it seems there should be a bushing or grommet that the rod should go through. Right now if you put it in park its sooooo sloppy you have to reach under the car and manually put it in park or it will still roll even though the gear shiter is in park. Any help locating these parts or a part number or correct name would be helpful.
thanks
Chris
Please help I am helping a buddy working on a 66 charger with a 68 318LA & 727 torqueflight transmission. I am looking for the BLACK metal "flag clip" that is shown in the attached picture. It holds the kickdown rod into the arm at the transmission on this rod there is no hole for a hairpin clip or cotter pin so I assume it must use this type of setup.
Second issue in same general area where the actual shift lever for PRND21 attaches there is a lock swivel nut that the previous owner just rigged up with some wire it seems there should be a bushing or grommet that the rod should go through. Right now if you put it in park its sooooo sloppy you have to reach under the car and manually put it in park or it will still roll even though the gear shiter is in park. Any help locating these parts or a part number or correct name would be helpful.
thanks
Chris