Looking for info on what is needed to convert my 67 gtx from manual steering to power

MOPOWER871 · Dec 28, 2014

Hi fellow b body guys , im looking to convert my 67 gtx over to power steering . Any help would be great. Is there a lot of drama involved?. Figured it would be a good time to do it while i have the motor out. Thanks

soundhd · Dec 28, 2014

New steering box, power steering pump & mounting brackets (either mechanical or electric), hoses, and new belts, etc... if you go with a mechanical pump.

hammond472 · Dec 28, 2014

Also need pullies and there is a difference in the steering column.

GearAddict · Dec 29, 2014

^^ They got it... all should be straight forward with no fab needed, biggest pain is finding a used column (which is not that difficult, they are posted here and on ebay regularily). The Power Steering column has a shorter shaft than the Manual one.

soundhd · Dec 29, 2014

Good to know...did not know the steering column needed to be changed also (forgot about the pulleys)...think maybe the pulley configuration will also depend on the engine.....hemi pulleys are different (at least on the 70's) and also A/C cars are also different......

hammond472 said:
Also need pullies and there is a difference in the steering column.

2059 · Dec 29, 2014

also your power steering box input shaft diameter is different from the manual. One is 1/2" the other a 5/8" if I recall. (maybe 5/8 and 3/4" point is, they are different) When you buy the PS column, make sure the shaft and coupler is in tact and on the shaft, you should be ok. The steering shaft itself is the the same diameter so your steering wheel should work ok.

Good luck keep us posted.

MOPOWER871 · Jan 3, 2015

THANKS FOR THE INFO I HAD A FEELING THERE WAS GOING TO BE SOME DRAMA , YOU THINK SOMEONE WOULD HAVE COME UP WITH AN ADAPTOR COUPLING OR SOMETHING ... :sad10:"OH YA ITS ONLY NUTS AND BOLTS AND I LIKE IT , LIKE IT, YES I DO! .. I LIKE IT. "ROLLING STONES " SORTA:headbang:

VeryFastCoronet · Jan 7, 2015

Mancini Racing makes a coupler adapter, but it is for a Power steering shaft to Manual steering box.

MOPOWER871 said:
THANKS FOR THE INFO I HAD A FEELING THERE WAS GOING TO BE SOME DRAMA , YOU THINK SOMEONE WOULD HAVE COME UP WITH AN ADAPTOR COUPLING OR SOMETHING ... :sad10:"OH YA ITS ONLY NUTS AND BOLTS AND I LIKE IT , LIKE IT, YES I DO! .. I LIKE IT. "ROLLING STONES " SORTA:headbang:

Bigal75 · Jan 8, 2015

I did the power to manual swap - I have a lot of the parts needed for this swap in a box - I may be willing to sell ;)

super-bee_ski · Jan 8, 2015

COOL
Bigal75 may have your parts!

GTX MATT · Jan 8, 2015

Do you have column or floor shift?

Bigal75 · Jan 8, 2015

All I have is the pump, brackets and hoses and gear. The gear seeps a bit.

Looking for info on what is needed to convert my 67 gtx from manual steering to power

MOPOWER871

Well-Known Member

soundhd

Well-Known Member

hammond472

Well-Known Member

GearAddict

Well-Known Member

soundhd

Well-Known Member

2059

Well-Known Member

MOPOWER871

Well-Known Member

VeryFastCoronet

Well-Known Member

Bigal75

Well-Known Member

super-bee_ski

FBBO Gold Member

GTX MATT

Well-Known Member

Bigal75

Well-Known Member

Similar threads