ash tray light

velozp · Jul 2, 2017

Hi guys my ash tray light went out on my 68 RR . I put a 12 v battery on it and its dead. My question is I have it out but how does the socket come out of the case so I can replace the bulb? It was working till this summer Its minor but the novelty is great. Thanks

moparjohnny · Jul 2, 2017

i changed mine last month,it pulls out from the bottom i used small pair of pliers and just pulled down and socket came out from the capsul,do not squeeze to hard.i like for things to be working as well.

Matthew Maloney · Jul 2, 2017

I actually removed the blue plastic light diffuser in mine and solder installed a green 12v LED. No more problems.

velozp · Jul 2, 2017

moparjohnny said:
i changed mine last month,it pulls out from the bottom i used small pair of pliers and just pulled down and socket came out from the capsul,do not squeeze to hard.i like for things to be working as well.

Thank You it took a few minutes, some rust along the ground clips, I will clean it up and make it new. Thanks have a great summer

velozp · Jul 2, 2017

velozp said:
Thank You it took a few minutes, some rust along the ground clips, I will clean it up and make it new. Thanks have a great summer

Do you know the correct bulb #? In my book it says its a 1445 fusible link and their is a 1445 bulb avl at most stores but my bulb says # 53. any idea?

ash tray light

velozp

Active Member

moparjohnny

Well-Known Member

Matthew Maloney

Well-Known Member

velozp

Active Member

velozp

Active Member

Similar threads