66Satellite47
Well-Known Member
You can easily tell if it is a 440 or 383. The 440 has a large machined stamping pad adjacent to the distributor. The 383 does not have this pad. That block casting number is the same as my '67 440.
1969 Dodge Charger SE Value? Found in Backyard.
- Thread starter Rikker
- Start date
Thank you very much for the information, I will check it out when I go back next week.
To the left of the distributor is a flat machined area that is stamped and should read "C 383" (C for 67). Near the bottom of the same area if a high performance engine, stamped "HP". Below is an example but of a none HP.
Last edited:
Thank you for the pic. I will post pics after next saturday if the deal works out. I know what to look for now that helped.To the left of the distributor is a flat machined area that is stamped and should read "C 383" (C for 67). Near the bottom of the same area if a high performance engine, stamped "HP". Below is an example but of a none HP.
View attachment 675053
Yep. Good luck. And just an fyi, that hole just above the stamped area is where the distributor goes.
LOL I know there is a joke in that as well. Thanks
Similar threads
