Power Steering Hose Adapter

bandit · Sep 22, 2019

Anyone know the size of the adapter piece for the power steering hose? It's that male/male fitting that screws into the power steering box and allows you to screw in the ps line. Nothing local so I have to order it online and there are a few sizes.

cr8crshr · Sep 22, 2019

You can take your old one to a NAPA store and they will make a replacement for you. Just make sure to bring all the pieces you have as they will be able to completely match it up like the original...cr8crshr/Bill :usflag:

bandit · Sep 22, 2019

Thanks but I don't have the original. Previous owner took out the lines and that fitting. Putting in a new Firm Feel.

5.7 hemi · Sep 22, 2019

IIRC the thread size in the box is 1/2-20 with a copper crush washer and the hose side is -6, 6an, 6jic.

ws27 · Sep 22, 2019

Depending on the year, it's either a 1/4" male flare, or a 5/15" male flare. If you have the PS hose, measure the tubing at the box end.

bandit · Sep 22, 2019

Thanks for the replies. Luckily found a male/female fitting in my drawer and used it to test the box and hose threads and it fit. Now just need to order up the male/male.

YY1 · Sep 23, 2019

probably not an issue, but be aware that later (80's) ones were metric!

just in case the counter guy says he has one in the back

Power Steering Hose Adapter

bandit

Well-Known Member

cr8crshr

Well-Known Member

bandit

Well-Known Member

5.7 hemi

FBBO Gold Member

ws27

Well-Known Member

bandit

Well-Known Member

YY1

Well-Known Member

Similar threads