67 Plymouth spring and mini tub mod

440ronnie67 · Apr 19, 2020

Had to reinforce trans mount, it sagged a little bit when the weight was on it

440ronnie67 · Apr 19, 2020

Trans cooler in place, needed a little weight in the r/r. Had to fab up a shield so rubber wouldn't clog it up.

440ronnie67 · Apr 19, 2020

440ronnie67 · Apr 21, 2020

Finished

440ronnie67 · Apr 26, 2020

Drove her around the block yesterday,it’s been over a year since the last time. It was Great! Didn’t test the go over drive because you have to go at least a mile before turning it on. Pr instructions. I ended up with 4.5deg for a pinion angle. No noticeable vibes yet, did not gas on it or anything like that. Have to finish wiring max 5 n20 controller and a few other things. And pass seat.

440ronnie67 · May 6, 2020

440ronnie67 · May 6, 2020

Replaced the deck on my trailer and sealed. A little more paint and it will be ready

440ronnie67 · May 17, 2020

440ronnie67 · May 17, 2020

New wheels for the back, ordered the wrong size for the front so it will be a couple of weeks

bearman · May 17, 2020

That looks mean doing a great job

440ronnie67 · May 17, 2020

bearman said:
That looks mean doing a great job

Thanks

70chall440 · May 17, 2020

440ronnie67 said:
Replaced the deck on my trailer and sealed. A little more paint and it will be ready

View attachment 946767

What did you use to replace the deck, was it treated lumber? I am getting ready to redo mine as well.

440ronnie67 · May 17, 2020

70chall440 said:
What did you use to replace the deck, was it treated lumber? I am getting ready to redo mine as well.

Used treated 2x8 from local lumber yard . Half the price of home depot and Lowe’s . Let sit for a few days and applied fence and deck sealer.

70chall440 · May 17, 2020

Awesome, thanks.

440ronnie67 · May 17, 2020

I used new lumber. I read the post it looked like I said I used old used lumber

70chall440 · May 17, 2020

I read it as you intended it but looking back at it I could see what you mean.

Fizz66Coronet · May 18, 2020

Wheels and car look great. What size rim,tire and backspacing did you go with

440ronnie67 · May 18, 2020

28x10.5 TX concepts 15x10 6.5 bs

front 26x6.5r17

440ronnie67 · May 18, 2020

Rc concept wheels

440ronnie67 · May 20, 2020

Planning on doing some tnt at out local track on Friday. Plan is to go straight and check plugs. Will worry about times when all is good.

67 Plymouth spring and mini tub mod

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

FBBO Gold Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads