Had to change the pick up on this as the wires were mouse eaten. Now the rotor will turn almost 1/4 turn back and forth without moving the shaft. I don't think that is the way it was before I got my hands in the mix. I don't know if I dropped a spring or something else but I has to be pretty easy to fix, I just don't know it.
At this point (while turning clockwise, to the left) I can feel spring pressure:
Now if I turn it back to the right (counter clockwise) it will do a hard stop at this pint:
Maybe this is right, but it doesn't feel right to me, so I will stop and ask the question.
At this point (while turning clockwise, to the left) I can feel spring pressure:
Now if I turn it back to the right (counter clockwise) it will do a hard stop at this pint:
Maybe this is right, but it doesn't feel right to me, so I will stop and ask the question.