Same performance as what? I know the 68-69 B factory B intake is pretty good.....but don't know much about the RB factory intakes.
Don't really remember the numbers but that does sound about right. Thing is, not many take an RB up to 6500....
Bingo !
And so what is a fair price for this intake?I'll give ya 50 bucks shipped for that old hunk of scrap aluminum..
I was kidding but I usually use Ebay to help figure out a price.
Well, a new Eddie performer (comparable) is $318, and a performer rpm, (a better manifold) is $330 (IF you can get either of them at the moment) I would consider $200-225 a fair price. (The last intakes I bought were a tm7 for $75, a M1 for a dominator for $80, and a team g weiand for $100).
it depends on what u want to do with it ? r u racing or just driving ? the one is a duel plane intake & the other isn't(i dont remember witch one os what) . then if u have the one over the other & u want to save $$$$$ u use what u have . the other thing to watch for is warpage . i had a older mopar performance on a 440 & after i took it off the intake bolts would not line up on the heads . everyone told me the heads was cut too much & i had to get the intake milled to match the heads . as it turned out the aluminum was badly warped . i put a stock cast torn intake on & everything lined up jus fine
