• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

62 Belvedere 318 poly granny cruiser (one day i hope)

Soo.. didn't know cone posi's (had to..) sure-grips need additive, bought some Ford stuff and my god.. rear end dope is annoy but the stink from this is insane...
 
Soo.. didn't know cone posi's (had to..) sure-grips need additive, bought some Ford stuff and my god.. rear end dope is annoy but the stink from this is insane...
I think it needs it. Send Rustyratrod a pm on A bodies. He knows a lot about those.
 
I think it needs it. Send Rustyratrod a pm on A bodies. He knows a lot about those.
It does, for some reason in my brain i thought it was to help clutches in the clutch type.. but mine has been making some noise so i did some reading. Will throw it in this weekend, just the stench is soo bad
 
It does, for some reason in my brain i thought it was to help clutches in the clutch type.. but mine has been making some noise so i did some reading. Will throw it in this weekend, just the stench is soo bad
Nasty smelling stuff. Squirt some in and go do some figure 8's.
 
I put the additive in and spilled a little on my garage floor.. and now i need to burn my house down.. I swear it's all i can smell right now and i'm down in my basement.. it's like it crawled into my soul...
 
K.. i want to change carbs and really feel like getting a 1913 AVS2.... but know that eventually i will probably end up with a holley.... AVS's have always been just easy.. and once setup never seem to give a problem til the day they come up.. holleys same but a bit more tempermental... plus the avs2 is about $200 less than a brawler....

anyone have input on that?
 
K.. i want to change carbs and really feel like getting a 1913 AVS2.... but know that eventually i will probably end up with a holley.... AVS's have always been just easy.. and once setup never seem to give a problem til the day they come up.. holleys same but a bit more tempermental... plus the avs2 is about $200 less than a brawler....

anyone have input on that?
I have a 650 AVS 2 but I haven't ran it. I was planning a LD4B and that on the 318 in my Swinger but the stock 2 barrel runs so well, why change. I could put it on the Weiand on my Poly but "the 2 barrel works so well, why change". (I sound like a broken record) The Weiand is an single plain and the older guys say they don't work as well on stock Polys. Might as well keep what I have.
 
I have a 650 AVS 2 but I haven't ran it. I was planning a LD4B and that on the 318 in my Swinger but the stock 2 barrel runs so well, why change. I could put it on the Weiand on my Poly but "the 2 barrel works so well, why change". (I sound like a broken record) The Weiand is an single plain and the older guys say they don't work as well on stock Polys. Might as well keep what I have.
yup i wouldn't change anything on yours.... lucky bastage :)
 
yup i wouldn't change anything on yours.... lucky bastage :)
I just found this dual plane. On E bay. Pardon Our Interruption...
1758905788810.png
 
Just a little motion sickness for viewers in the morning :)
That reminds me, I need to adjust my headlights. My bad, been following along for quite a while and I don't know what engine you are running. I know you are building a stroker but......
 
That reminds me, I need to adjust my headlights. My bad, been following along for quite a while and I don't know what engine you are running. I know you are building a stroker but......
Yeah.. my headlights are aimed too low... just don't feel like fixing it :)

that's just a $300 facebook 318 roller with trickflows and a howards roller, i put too much exhaust on so it sounds like a old mans truck, didn't want to annoy my neighbors...

I got luck on my the motor, no smoke, no weird noises.. was clean inside. Except.. the cam bearings... they are sooo bad and flaked off that it worries me. I didn't expect to keep the motor in this long.

This was how it sounded before changing mufflers and adding resonators..
 
Yeah.. my headlights are aimed too low... just don't feel like fixing it :)

that's just a $300 facebook 318 roller with trickflows and a howards roller, i put too much exhaust on so it sounds like a old mans truck, didn't want to annoy my neighbors...

I got luck on my the motor, no smoke, no weird noises.. was clean inside. Except.. the cam bearings... they are sooo bad and flaked off that it worries me. I didn't expect to keep the motor in this long.

This was how it sounded before changing mufflers and adding resonators..
Wow, you lucked out on that one. It sounds great.
 
Deleted that video... someone bitching bout recording on my phone while driving... and they aren't wrong :(
 
I suppose. We have a law her now, no cell phones while driving.
we have that here but cops don't enforce it.. i see accidents all the time cause of it. I didn't think bout it myself since i was alone at 6am.. and not driving stupid.
 
Auto Transport Service
Back
Top