They're always great company! I have many friends that run their kits competitively .
440 Roller Rockers
- Thread starter LSS&B
- Start date
Mopar Hunter
Well-Known Member
Do you have an item number for the stainless arms, I’m not aware that Comp Cams makes stainless arms for Mopar.
- Local time
- 3:20 PM
- Joined
- Jul 9, 2019
- Messages
- 11,857
- Reaction score
- 31,247
- Location
- Modesto California
Comp Cams 1621-16 Ultra Pro Magnum Shaft Mount Rocker Arms Chrysler; 1.5 Ratio
Actually they are Chrome Moly... My mistake..
Mopar Hunter
Well-Known Member
Ok thanks, I wasn’t sure if you were talking about those, my buddy has them, with no problems at all.
- Local time
- 3:20 PM
- Joined
- Jul 9, 2019
- Messages
- 11,857
- Reaction score
- 31,247
- Location
- Modesto California
I know a couple guys running them with .620+ lift & no issues...
- Local time
- 6:20 PM
- Joined
- Aug 18, 2024
- Messages
- 4,928
- Reaction score
- 9,325
- Location
- Virginia Chesapeake Bay
Okay,
Just placed my engine package order with 440. After talking with Mike, who was very helpful and knowledgeable, he did not recommend using their aluminum shaft bearing rocker set that was included in the engine package. So for the record,
So I went with their stainless steel roller tip shaft bushing set. He said they are made by the same people who make them for PRW.
- Local time
- 3:20 PM
- Joined
- Jul 9, 2019
- Messages
- 11,857
- Reaction score
- 31,247
- Location
- Modesto California
Excellent choice, those have a good reputation...
I recommend a Honey Maple Glaze, makes the crow so much better..
I recommend a Honey Maple Glaze, makes the crow so much better..
Similar threads
