Search results for query: *

Ok, this is where my ignorance will really shine! 1rst, what would cause a vertical 32th" wide divet the length of the cylinder? was it caused by a stuck/ broken ring gap, or is it a worn sleeve gap from a previous repair? only one cyl. looks like this. Otherwise, I cant tell if there is a...

74' plymouth satellite. I need help envisioning what is going on. Despite youtube video's involving under dash duct removal and such...I swear the linkage is under the vent cowling outside the car. Is there anything I need to know about removing this 6" wide strip of metal? It looks like the...

74' 727 TF. odometer is off, or slow by 2- tenths, or its logging 8- tenths as 1 mile. This translates to 10 + miles per hour slower reading on the speedo. I counted the splines on the cable gear and lined up the proper marks on the trans. Or I believe I did. Assuming the speedo cable bracket is...

So far, so good on the trans rebuild. Can anybody recommend a good column shift linkage kit? The previous owner modified the lower brackets to get above the header collectors, and I cant figure out exactly what they did. Ididit makes a "cable" conversion kit to replace the linkage, anybody...

STATUS : 74' satellite, 1k miles on a rebuilt 318 w/ 727. 5 gal's of gas in the tank with whole bottle of fuel stabilizer. with car running, fuel stabilizer was sprayed into the carb until the engine stalled. It has been dry and on blocks for 14 years. It ran great but trans dumped fluid. I'm...

Can anybody identify or make a educated guess on the smaller seals in this kit? Also came with 8 small steel washers. I'm in over my head as it is...I really dont want to start disemboweling this trans hoping I'll find out where some of these seals go. Which seals typically come in a kit like...

So many ways to phrase this question. Trans ready to come down. The rear torsion bar support will not let this happen as the trans extension runs above and past the support by several inches. Nothing I've read describes this situation. Because the shorter 904 usually came on the 318, I'm...