Search results for query: *

70 Belvedere. I just replaced my tank with an AMD unit, new straps, new grommet, new filler neck. I used the 70 style grommet as referenced by Dadsbee in May. Question: Can anyone confirm that the rounded end of the grommet goes in first? Main Question: Does the raised bead on the filler...

PM me what you have please.

Anyone know what it would take to use this 76 F-Body 3-speed wiper motor in my 70 B-body? Would I just use the 70 Pivot arm, cam bushing, switch? Thanks!

In the Metro Detroit and surrounding areas - Looking for a good condition housing, with axles is okay too. 70 B-body

Just tore down and cleaned up my 70 B-body 8 3/4 rear. The housing has this terrible welding on it, yet the inside is as it should be. Looks like the flange washed out and it was built up with terrible weld. Factory???

Just got my front suspension back together and on the ground. Torquing the pivot shaft nuts, one side went to 145ft-lb without issue. On the other side, the nut will not seat before stopping. Not even the impact would move it along. The threads near the deformed end of the nut look a bit messed...

1970 B-Body. I want to ensure I don’t have the drag link flipped. Should the bend be going away from the sump or towards it. Currently I have it away from.

70 440 electronic ignition, long tube headers. I bought MSD Street Fire wires many moons ago and am just now installing. They have straight boots on the plug side, and 6-90 degree 2-straight boots in the distributor side. Straight boots are only long enough to reach 2 or 4, maybe 1. Also, the...

Is there a special coil bracket for the offset (height) coil bracket mounting bosses on the edelbrock Performer? Or, do I just need to make a nice spacer? Thanks

I am installing a set of repopped upper control arms on my 70 Belvedere. I am swapping out the bushings they came with for Moog Problem Solver offset bushings to get more camber. Question: The stock bushings have inner and outer “washers” that have a nice array of raised lines, I in assume to...

Does anyone have the specs for a dipstick tube o-ring. Doesn't seem to be available as that part from the autoparts and I don't have time to order one online. If it is a standard o-ring size and material I may be able to get from grainger next day. Thanks.

Looking for new or used Hooker Blackheart Gen 3 Hemi Swap Headers for B-body. BH2358 Would consider other brands as well. Thanks!

Ordered this Drip Rail Trim from Classic Industries for my 1970 Roadrunner. The only pics available show it with a vinyl top. Description does not differentiate. Does anyone know if there is vinyl top specific trim (I don't have a vinyl top)? 1970 Plymouth Roadrunner Parts | MB1679 | 1968-70...

Looking to buy an Air Grabber Oval air cleaner, with oval chrome top and single 4bbl base with 440 drop. Like shown, but with chrome lid.

Looking to buy an aftermarket Air Grabber Oval air cleaner, with oval chrome top and single 4bbl base with 440 drop. If anyone can point me to a vendor I would appreciate it.

I ordered Mr. Gasket header studs for my 440 906 heads and to my surprise they have no shoulder with a continuous thread from end to end. I know the shoulder is not a sealing surface, but I imagine the shoulder interrupting the spiral leak path would help with reducing the leak path. Any...

Looking for a new set. Mr Gasket 3415 Header Studs/nuts

Is this seal just a metal “conical” washer, or is there supposed to be rubber molded on it?

Looking to replace the wheel studs from L to R hand thread since the disk brake conversion is R hand thread. Is the room to change the Rear Studs without pulling the axle?

Valvoline max life (high mileage) Dexron VI synthetic is really cheap at Walmart. Like 18 bucks a gallon. Planning to use Synthetic Dexron VI in my fresh 727 rebuild. What is the big difference between the max life and the regular Valvoline Dexron VI synthetic. Max Life advertises special...