Search results for query: *

Recently I hit a deer doing 30 mph on my 03 Harley Ultra Classic. I am fine and have pretty much completely healed up but now I am trying to repair the bike. I am replacing the front fender and 1 lower fairing both of which I sourced from eBay. The lower fairing is very nice and will just...

Anyone have any tips or information in refurbishing the upper door panels? I have the new panels from Legendary but I am a little confused by how to attach them to the metal upper part. It loos like there were some type of hooks or something to bite into the particle board and I am pretty sure a...

Let me begin by saying that I am sure there are other ways to accomplish this task, however what I am about to depict is how I just did on my 71 charger. Also, I will probably leave out something so forgive me but I am sure other members will chime in to fill in what I miss. I decided to make...

I am running a Holley intake and am trying to adapt my stock 5.7 TB to it. Initially I used a Holley LS TB to 4150 adapter and just drilled some holes to mount the TB but now I want try and get the TB lower (the Holley adapter is thick on the back to facilitate some vacuum ports which I don't...

As the title says, I have a new Mopar crate engine which is a 2019 manufacture 5.7 crate engine. I got it new and installed it about a year ago into my 71 Charger. I finally went to fire it and no oil pressure. The engine ran for about seconds and died, I did this twice so about 30 seconds all...

I am running a Terminator X max in my 71 Charger which has a 2019 Challenger (6 spd) crate engine. In trying to develop the GCF file its asking for a few things I am having issues finding such as; What injector PN - I tried to look this up and I found a variety of part numbers but I am not sure...

I am sure that any of you that have been messing with old Mopars have seen this (as well as the other brands) wherein when you try and shut the hood, it begins to come down but then the back of the hood wants to remain up requiring you to go to each side and put the back corners down. In the...

As the subject line asks, is anyone out there running a LS DBW TB on a G3 Hemi? I am asking because I am currently using a Holley single plane intake on my 2019 crate 5.7 (not running yet) which is a 4150 style intake. Holley makes an adapter to install a LS DBW TB onto a 4150 intake but do not...

I thought I would throw this out there for anyone needing new bolts for this project. I have no affiliation with this company/website I am just posting the information. Chrysler Individual Fastener Kits — AMK Products, Inc. Here is another source as well Fasteners

First off I am not affiliated with this company in any way, I was sent the link and I subsequently ordered some patch panels for my 68 Barracuda, however I noticed that they have some patch panels for 71-74 B bodies and thought someone might be interested here. I am merely passing it on, if...

I also found out that I have a rear defrost switch which I think is actually from a C body. It has a orange light that comes on when rear defroster is on, also it seems to have multiple settings (like 5 or 6) rather than off, low and high. Can anyone confirm this? I have one in my 71 charger...

I want to install my headliner but I need to figure out where all of the screws and such are so that I can put all of the various items on after the headliner is installed. I have these 2 wedge shaped brackets that are spot welded to the car to which the retainers attach. I found what I thought...

I am assembling my 71 Charger and I need some pics of the inside of the car of specifically the rear window area and over the doors. I have these 2 plates and I am trying to determine where they go. I thought over the doors but they don't seem to fit there, someone suggested around the back...

Is anyone running a VA system in their 71 up B body? I am interested in how you did the control panel or perhaps better said what control panel did you use. I have one from VA but it is too tall and too narrow for the factory slot. I am not afraid to cut the bezel but I just cannot see how this...

Anyone have a solution for the map light switch, they don't seem to last as all of the ones I have seen on eBay are like mine, missing the arm. I am going to research some small toggle or maybe a push button switch but I thought I'd ask to see if someone else has found something that works.

As I am building my 71 Charger I have decided that I want to use a Holley single plan intake, mainly because it will allow me to run a Mopar oval air cleaner under my air grabber. The first issue I am encountering is that it does not seem that anyone makes an adapter for a Mopar throttle body...

As the title says, I have a G3 Hemi (5.7) and am going to be using a cold case radiator with a 1.5" upper and 1.75 lower nipples both on the passenger side, anyone have any recommendations for hoses? I have a Holley front mount so the nipples swivel.

I need some help from those of you who have functioning 71 Chargers with the base (non-RT) taillights. I need to know that the functions of the red lenses (one on either side of the backup light). Obviously they illuminate for parking/running, stop and turning but I need to understand which lens...

I have and plan to use a DRW pedal from a 2015 Grand Cherokee (bought new from RA) in my 71 Charger. I made a mount (actually am redoing it now) but I realized I don't have an electrical connector for it, so question #1 is does anyone know where I can get the connector outside of a salvage yard...

As the title says, I am looking for a picture of the bucket seat reinforcement plate location in a 71 B body (charger if it matters). I see USCT sells a kit but I am trying to work out where they would go. Thanks