Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi Wagon Friends ! Anyone knows sure the 71 grill of a coronet fit also on a 73 model ? Station wagon or 4 door cars are same grill , right ?
Cheers and thanks in advance .
Steffen
I think how it should be, but just to make sure , that’s normal by this steering column?
Just can pull the steering wheel about 1/2“ to 3/4“ to me if I try to pull the steering wheel to me …
Second question : If it’s normal , what stop it to not can pull more to me, just the small splint in...
Hi everyone,
now the build and the „ break in „ with driven break in oil ( BR 40 ) it’s done , everything looks perfect, but just I like to know you’re experience
Engine components :
Motor have Main clearance about 0.003“and build with the follow parts :
TFS-61617801-C00 Heads
With
440...
Hello everyone !!!
maybe someone had the same problem like me ….
We rebuild my 440cui RB-Block and stroke them to 512 cui with 440 source kit .
after we using brand new 240 Trickflow heads for the upper part, and because I want change my ignition from revanator system to the MSD system I try...
If I should use a „ TB Zinc-Plus“ ( like von Lucas Oil) for the engine break in or not?
I know it’s „ normally „ only a must have for break in a flat tappet cam , but in near future my 512 Stroker build are finish , and some friend tell me „don’t forget to use this „ Zinc add“ on the first...
Anyone knows why AMD make this “ incorrect “ in his Fenders . In my experience original fenders have just a round hole in it where I can install the small rubber bumper
Hi all,
now I get my first part to bring my front suspension from a Tubular IFS from Control freak suspension ( first generation )
back to original K-Member style suspension .
Can anyone tell me from what a car and year the k-member came ?
i just found a stamped number on it : 43081
And...
Hello guys , I friend of mine looking for a exact spare wheel with tire for a 68 charger .... anyone knows the correct wheel style size and tire ?
thanks in advance
Steffen
Anyone know’s about the rotor wear or when it’s time to change it if the slot in the rotor are no more visible ?
I not found real statement from wilwood it self ...
First picture is actual rotor after Just 8000 Miles , can be wear it out at this short mileage ?
Second and third picture...
Hi all, now I need again a recommend from you guys, Because Ihave the choice between Borgeson and Flaming River.
what you prefer :Borgeson or Flaming River ?
Some one use kind of this vibration reducer / damper and have experience with it?
My set up now is :
Flaming River rack and pinion...
If I shift from 2 to 3 gear ( full manual valve body ) I get a big loud bang coming from the passenger side , there where I have one layer more leaf springs ( XHD) .
I try many adjustments already , normally I like on street drive to make the caltracs full “ open lose “ so like you not have one...
Hi friends,
Anyone know‘s the size diameter and the number of spline from a 68 Charger column? Because I want order from Borgeson a vibration reducer joint and want exchange it with my installed coupler joint from flaming river , to hopefully eliminate my steering vibration coming from the rack...
Hi All,
Now I want start to planing a new front end for my 68 Charger with a second gen Hemi for maybe winter 2021 ...
Car will be used 80% For normal to fast street drive and maybe 20% quatermile mile in the year.
Actually I still have a independent front suspension from Control freak...
Hi guys , I need you’re advise again .
Engine is gen 2 Hemi 489 with solid lifter and Roller cam .
I give the order to my engine builder shop who build this engine for me After 4000 miles to check the rod and main bearings .
The shop was checking rod bearing 7 and 8 and main bearing 5 ...
Order two weeks ago and pay already . Since 6. July is waiting for shipping .
E mail also no contact ...
they maybe closed the whole shop and office because COVID ?
Hi guys, sorry as a engine rookie I have some maybe stupid questions
Engine is a 426 gen. 2 Hemi with actual 489cui ,( first over bore ) mopar mega block ( cast iron ) with Keith black billet crankshaft , mopars performance aluminum heads ( full ported)
Oliver rods
Ross piston ( compression...
I found it only on one website LHC .
But they not respond on my mails , and I can not order from their website directly because they not shipping to Germany
Anyone knows who sell it too?
i check already summit / e bay.com / amazon.com / Jegs ... nobody have it ...
I very happy if someone can...
Hi all , a friend of mine change on his 68 charger R/T all the wiring harness in his charger to new one from year one . Also he order from year one a Original Repro tic toc tach and replace it with the the installed tic toc .
After the connecting and replacing was done he start the car and make...