Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a complete poly 318 with a 727 push button transmission for sale. Came out of a 64 polara that had been sitting for a long time. When it was in the car the engine turned over with the starter. That’s all I really know about it. I’m keeping the a/c pump and bracket but everything else goes...
Got a 64 dodge polara I am parting out. Poly 318. Engine turns over with starter. I got it to fire and run for about 5 seconds on carb cleaner. I couldn’t get it to fire again after that. 727 push button transmission. Tapered 8 3/4 rear axle. Factory a/c car. Power steering. Pretty much...
Getting ready to have my car blasted. Once it's done I am going to weld frame connectors on it. I guess my question is. If all the suspension is off the car and it's on a rotisserie what the best way to go about it. Should a guy set the car down on jack stands, so it's not hanging by the ends...
Hey all. I still have the 64 dodge 440 parts car I am parting out. I also have acquired a 64 dodge polara parts car. Both 4 doors. Right now I am interested in just parting the 440 but if there are things on the polara I don't need for my car I might be able to help you out. Right now I am...
Hey all. I just picked up a 64 4door polara parts car. It will be a parts car for the things i can use on my 2 door hardtop. The parts car has factory a/c. Would I be better off to sell the factory a/c and go with a vintage air system or use the factory one. I want a cold a/c not sure how these...
I have kinda searched around and not got my question answered. So thought I would ask here. I have a 8 3/4 tapered axled. I came across a good deal on a set up 489 case with sure track. I am going to be rebuilding the whole axle. My plan is to use the green bearing axle kit from Dr diff. All the...
Hey all, I still have the 64 dodge 440. 4 door. I am using for parts. I bought it for some parts that will fit my 64 hardtop. I would let some parts off of it go that I can't use on my hardtop. I plan to keep the front clip, and some other odds and ends. It is a poly 318, with push button 727...
Hey. I am looking for some frame connectors, for my 64 polara 2 door hardtop. I see there are long wheel base and short wheelbase. I am assuming the long wheelbase is for 4 doors? I need the short wheelbase correct? Also anyone have any recommendations? Best ones out there? Weld on or bolt on?
I have two poly 318 engines. One is stuck. The other has been sitting in a car for quite some time with the intake manifold off of it. Also have a trunk full of poly parts. If you are needing anything message me on here. Located in central ks. 67401
Ok so here's the question. I am looking for a rear end for my car. Currently has the tapered axle 8 3/4. Engine builder says he thinks the engine will put out 550hp. What is everyone running tire size with comparible hp. Curious how big of a rear tire I can get in the factory wheel well, and if...
64 dodge 440. parting out the things, that I won't be able to use on my 64 polara hardtop or aren't compatible with it. Bought it for some parts I needed for my car. Has a poly 318 with a cable shift/push button 727, and tapered axle 8 3/4. If any of you guys are needing anything shoot me a...
Curious if any of you know if the instrument cluster bezel design on a 64 fury is the same as a polara. I kind of want to swap my polara cluster to a fury cluster, because I like the round gauges. My father in law made the comment that he didn't know if the pattern on the facing was the same. I...
Hey all. Have a 64 polara 2 door hardtop. I am missing the chrome trim piece on the bottom of the rear window. Anyone know if other year models will work on it. Fury, or 65 window trim etc.
Hey all. So this is probably a stupid question, but I will be putting a 440 in a 64 polara. It originally had a 318. My question to those that have done it or might know is. The 318 has a mid sump oil pan. Being as I don't have the mounts for the 440 yet. I was assuming I would need a mid sump...
Need to get the windshield out of my 64 polara. Anyone know the best way to get it out? Was going to cut it out with wire, but wanted to make sure there wasn't something different, or that I needed to save before I cut it out. Or of it was possible to save to old windshield seal?
Hey all. My 64 polara has wheel studs with r stamped on the end on the left side of the car. And L on the right side of the car. From everything I have been reading the Left hand threads should be on the left and right on right correct?
Got a 64 polara. I have looked online and haven't came across a whole lot of info on the fender tags. Any of you guys make heads or tails of the fender tag codes.
Hey all. New here on the site. I have always been a Ford guy, but have always liked the old polaras. Well I came across one that has been sitting in a barn since 86. Pulled it out last weekend and So the project begins. Like I said I have always been a Ford guy so will be dropping in from time...