Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
this is a new build and irattice idle comes up n down .sprayed carb cleaner along intake and carbs. hard to tell with iratic adle. antifreeze blows through radiatior once it warms up. the upper radiator hose moves after it blows antifreeze not like a air in cooling system more like a volcano...
im running a 10.5 -1 compression motor and have had lots of issues with this engine running right. would to much advance on dist. cause it to blow i used victoror gaskets should i of used a steel gasket or a thieel gasket? with a wild cam ? on a 440 engine.
i just put my new motor back in after the cam bolt cam loose and runing all the bearings but noW i havE a new can of worms to deal with my motor now is over fueling and missing and has a eratick idle and no power took carbs off and opened them up and seem fine but there was fuel and carbon in...
looking for a good set or rear quarters 4 a 73-74 roadrunner or in this body style or if any one know anyone who is repoping these plz let me know send me a msg thanks pat
hey guys here a odd one. i got my 440 back from machine shop on thursday. they put the short block to geather for me and installed cam bearings. but my cam shaft wont fit into the last journal. its so tight it wont turn bearings ar instaled right n strait. never had this prob before and help...
ok guys im trying to figure out if the old pushrods will work in my engine i had a 509 cam and whent with a bigger camshaft its a 564 lift duration at 50 is 251 257 adv dur 295 307 would like to know if they will work i dont have the tool to measure them or i would any help would be great it...
ok every one im starting a new post to a prior prob as of last week. i know i told u about how my cam bolt had come lose and ate away at the cam gear from the pin, but i took cam out and found out that the cam and lifters had chips out of the cam and on the flat spot on the lifters. my ? is what...
any one ever use a gear drive timing gears? if so u think they rob horse power or just sound cool? and discusions or coments would be helpfull, before i put a new camshaft in me new motor seemed that the bolt walked its way loose not im going to have to flush my motor and get all the metal...
hey every one hope every one had a better day than me when out to my car a 73 rr 440 i think it ram out of gas the other day n died in front of garage after i got it started enough to get to garage it died out a few yard from my garage and tried to start n died right away then nothing but to...
i have a 73 rr originaly a 318 car. i rebuilt an put in a bb kframe and put in a new 440 i built ever since i put in the headers hit the gear box and starter and hit the inner fender on drivers side ive seen cars like this w the 78038 headman headers w/0 and problems and lots of room what...
i have a 73 road runner heres my issue im using headman headers 78038 headers and put a bb kframe in and this is a new enginge i rebuilt but my prob is the headers are hitting the gear box and so close to starter the the starter hets hot im using new generation starter high reduction or mini do...
i need some help. i just swaped the back tires on the back. i put 275 60 15 tires on the back just dont know how wide i should go. on the front with out prob or looking funy any help would be appreciated and some pics would help too.
which stock heads are the closed chambered heads and the ones that are the best ones that produce the best hp i know 516 heads are but what else are good heads?
looking to redo my interior but any one know what paint to use its a white interior and want to do the vinal and plastic but any one know the paint i should use and or a part # i used sem b4 with good luck but dont know what the part # for the egg shell white interior color # or at least thats...