Search results for query: *

Have a rebuilt 318 in my 65 Coronet. Been fighting a stalling problem for some time now. I can drive it just fine and can sense when it's going to stall and will adjust fuel pedal accordingly. But when my wife drives it she stalls it often. I can live with it, but she's going to fry the starter...

Hello, i am looking for a Thompson Federal power steering pump with reservoir. Its for my 1965 dodge coronet with the 318. Let me know if you have one laying around, i am mostly after the reservoir, but would take the whole thing, new used old bad, whatever you got. Thanks Steve

Looking for some advise here I rebuilt my engine in my 1965 dodge coronet, 318 with a high volume oil pump, with the 4 extra holes drilled in the oil filter mounting plate. Would i need to change the oil filter type for the high volume oil pump? The parts stores says stock filter is 51515...

I just put brand new green coolant in my 318 and within a few days in changed to bright orange, what would cause this? It's a fresh rebuild on the 318

Ok guys so on my 65 dodge coronet I have a 727 a in it and I adjusted everything by the book and I still can't get the kick down gear to work, when you get on the gas it's supposed to down shift to get you moving, also when your in drive and coming to a stop it doesn't automatically downshift...

looking for a part number for a speedometer pinion seal measurements: .250" ID .450" OD .150" wide its goes inside the speedometer gear that seals the end of the speedometer cable neeed help bad!

Can you guys help me out? i am trying to find a part number for a 727 speedometer pinion seal, these are the measurements: .250" ID .450" OD .150" Wide it is a rubber lip style seal that goes inside the speedo gear that seals the end of the speedocable The speedo gear is a D-18T purple in...

Have you guys ever seen this style rocker arm? If so where can i get them? the driver side are galling up pretty bad, i need to replace the pipe and all the rockers. when i do so i need to prime the oil pump make sure I'm getting good oil flow to that area so it doesn't happen again. i went to...

Hey guys need help with my a727 these are the numbers on the driver side just above the oil pan: G2466166 2120939 I don't believe that this transmission was originally in my 65 dodge coronet 440 4 door sedan because when i order transmission mount and speedo cable they are both wrong. how...

How come when i turn my lights on, i only get high beams which is low beam and high beam a total of 4 lights, but when i hit the low/high beam switch on the floor and go to low beam i get no lights. another intestering thing, if i have the park lights only, the front clearance lights work, but...

Hey guys i just got my 318 rebuilt and back in my 65 dodge coronet. The a727a small block transmission had no problems before i pulled it and the engine out. i put the rebuilt engine and the transmission back in and now i am getting a very weird sound. it sounds like the parking mechanism isn't...

Hey guys i just got my 318 rebuilt, putting it back in my coronet. but for some reason i can't get the oil filter base to seal up, i have inspected all the flanges, nice and smooth and clean, i used a factory gasket with sealant, that didn't work so i tried no sealant, and then i tried gasket...

I want to get air conditioning setup in my 65 coronet. It didn't come with any air conditioning, I talked to vintage air and they told me they don't make a plug and play kit for my car and they recommended I should get a "universal" kit, but I don't know what I should get? They weren't willing...

Hey guys I am a newbie have some basic questions. I currently have a 65 dodge coronet with a 318 block (1967-1975 casting number 2536030 318-3) bolted to a torqueflite A-727-A (dodge late 65 8-318 casting number 2466166). The engine is shot and I have a rebuilt cast crank 440 long block...