Search results for query: *

Trying to find somebody to check out a 742 sure grip diff. in east Tennessee, tried Hensley Mopar performance, doesn't do it anymore. If anyone knows somebody in this area let me know. Thanks

Somebody wanting to sell me a 1975-77 TQ carb , came off 440 and number on it is 2472 , don't know much about these carbs , seeing if it was worth buying , its all there together ,dirty , he's wanting $100 for it . Should I buy it or pass . Thanks

Has anybody mic the rear main oil seal journal on a knurl and smooth 440 crankshaft to see if the measurements are the same ?

Was checking out another forum and this person said has engine was running hot , he put new head gaskets on it and he said he drill 2- 5/8 inch holes near exhaust and 3 -1/2 inch holes near lifter valley in his head gaskets and said runs cool , stays at 180 , never heard of this before ? Does...

What's the part number for the double lip 742 pinion seal ? Had it wrote down , can't find it . Thanks

Been thinking about swapping a gen 3 hemi in 63 b body and been reading where people are using the A999 AND A518 transmissions behind the gen 3 , question I found a use A999 Trans with numbers 4028465 , 1976-77 model , how much is these going for ? Thanks

What brand of flex plate for big block , 727 trans. , 6 bolt crank , mostly for street . Thanks

Order trick flow cast aluminum valve covers for big block . Seeing who use these and what oil breather / pcv valve set up do you use . This is for street. Thanks

Which damper to use on 440 , internal balance , for street ? ATI 917122E or ATI 917120E . Thanks

Anybody using 440 source factory replacement rods or heard anything bad , good ? Thanks

What brand of rings for Icon pistons 9953 for street . Thanks

What do you look for to see if your ring and pinion gears needs replace , I know if it looks burnt or teeth is broken off or teeth is real thin . How much wear on teeth is acceptable . Google it but , everything except what i was looking for , like wear patterns good and bad . One more thing...

Was going to get Comp cam XE -274- H 23-224-4 , Now hearing bad things about them going to different cam , The question is what cam would come close or crossover to this cam grind ? The Comp cam was part of engine build combo , want to stick with that combo ,don't want to buy other parts to...

440 stock stoke , .030 , 9953 icon pistons , 10 in hole, about 10.1 comp., marsh sidewinder heads 84 cc , no major port work. comp. cam nostalgia 21-671-4 , d452 doug's header 2 in. edelbrock perf. rpm ihtake if fits under hood or holley street dom. 800 edelbrock perf. carb 1421. 11 inch...

Need info on sure grip clutch type carrier . The numbers on it is 22685X 12 15 64B . Trying to find out what year it is . Google it , everything besides what i was looking for . Don't have case. Thanks

Need this number decoded from 727 trans. 2464424. Have trans. codes but don't go back this far. It just goes to 2466xxx and up. Thanks

have 65 ply. sate. auto. trans. the question is can the counter weight on the front of the driveshaft be turn down . thanks

whats the piston to wall clearances on 440 forged pistons. thanks