Search results for query: *

Any recommendations for replacing/rebuilding power steering box. Classic industries wants almost $600 for one. Also was told to replace the old coupler with a borgeson unit anybody familiar with that?

getting a new master cylinder for the Roadrunner today, but before going any farther, i need to get the brake push rod out of the m/c valve assembly. how is it held in there? how can it be removed? thank you, Greg

i have pulled the front caliper off my 69 RR, removed the piston also. found the piston pretty banged up and seal is rough. pistons didn't have the dust boot either. my question is where do you folks buy these parts? this is what i will need: 2 front single piston calipers 2 front rebuild...

took my 69 RR manual brake car out for the 1st time in about 4 months. got to the first stop and felt the pedal went way down. took it back home and proceeded to remove reservoir cover on m/c, and fluid just poured out onto my inner fender. couple of things i should point out is the car has...

i have always had a soft spot for white lettering on tires. i guess im kinda old school. just looking for others opinions.

hi fbbo gang! Happy Memorial Week-end :) i have non-power disc brakes on the front of my 69 RR, and the driver side pads seem to be dragging on the rotor. i jacked it up ,and the wheel is hard to turn. i can hear the scruffing when turning by hand. is there an adjustment of some type to reduce...

Couldnt find anywhere in the forums on the stock length of the rear shackles. My car seems to be a bit high in the back and would like to lower it a bit. The shackles on it now are 4" center to center, and 5-1/2" long overall. I also have KYB shocks all the way around. Could it possibly be the...