Search results for query: *

On my 68 coronet, 383, having some trouble with the power steering return hose rubbing the bottom of battery tray. I've already had to trim the return hose due to hole from rubbing the tray. The pump is very close to the battery tray, absolutely no way to route that hose and not touch the...

Pulled the tired 383/727 out of my '68 coronet last month. Trans was rebuilt. I built the motor after machine work. .030 over, stealth aluminum heads, eddy rpm manifold, eddy 800 avs, aluminum pump housing and pump. Comp cams 477/481....9.44:1 static compression, 7.75 dymamic .. Got the...

After working my butt off for the last few months I finally took my car down the road! Man it felt good. First test drive was to the gas station and back, all good so far!

Alright, real close to finally driving this car. I have no reverse lights. Neutral safety switch is a 1 wire unit, reverse lamp switch is on the column. The problem is the tab or whatever it is that contacts the switch on the column is missing. Can this be found and replaced? any alternative...

Alright, finally getting around to putting the car back together after some much needed work. I replaced the pop out glass seals and noticed the glass does not seal as it should. With the latch all the way pushed in the glass is just sitting off the seal. Before I finish putting the interior...

Ok, maybe suffering from a mild case of paranoia but figured it would be worth a shot. On my '68 Coronet, the dash and heater box have been removed. I thoroughly cleaned out the wiper cowl of all natures crap. Shockingly there is no rot ! Before I put the heater box and dash back in I was...

Posted this in interior section, no response yet. Maybe better luck here ! http://www.forbbodiesonly.com/moparforum/showthread.php?86144-1968-Coronet-thumbwheel-radio

Ok, going to try and reseal both the front and back glass in my 68 coronet. Any advise you can throw at me is welcome !!! Front gasket is on order from classic, rear glass is sealed with butyl rope I assume. Question is, what size round butyl will work or would urethane in a caulk tube be better...

Ok, I did a brief search and couldn't really find what I was needing. Looking for throttle and kickdown cables from lokar. Both for my '68 coronet 383/727. I had a lokar throttle cable on my '65 coronet but cant remember which one it was / size. For those of you running both throttle and...