Search results for query: *

Hi everyone, Needing some expert advice from regarding how to identify the YEAR (if that makes a difference) in my 8 ¾ housing and Sure Grip punkin’. I have a 489 SG in my 66 Belvedere and would like to know exactly what year it came from. Any numbers I can search,…any identifying marks...

Hi Guys, Just a quick question regarding replacing the power steering coupler on my 66. When replacing the steering coupler, do you have to slide/pull the steering shaft (up through the steering wheel) so that the coupler can be installed? I need to have mine replaced due to age and...

WTB. Need both lens that fit a 66 Belvedere / Satellite Tail - Finish Panel. Just the lens and gasket (if available). Thanks guys......:usflag:

Hi Everyone, When I had my 66 Belvedere in the driveway, changing brakes & had the rear axel's out, I got caught in a Hail Storm a few months back. Although I tried to protect it the best I could, my ride suffered some damage, as well as destroying my windshield. I was really sick about...

Hi everyone, I am in need of the base plate for my 66 Belvedere hood ornament. I have the ornament (383) and the piece that secures it from inside the hood. Now, I'm just needing that small chrome piece (about 1 1/2 long-- with a hole) that fits on top of the hood and is the base for the...

Good morning to all, Just a quick note to say that I am considering replacing the single-pot master cylinder on my 66. With questionable brakes, I have started work on the entire braking system. I am comfortable on replacing everything on all 4 corners, including wheel cylinders, hubs...

Hi all, Quick question (or suspect). I have a 66 Belvedere that --on occasion -- is difficult to roll forward. I know that my Right Rear drum is holding me back and feel that it is engaged. I can move in reverse, but forward motion is difficult. With enough RPM, I am able to move it...

Hi to Everyone, Just a quick question on using a timing light on my 383. I bought a 66 Belvedere that already had MSD installed. The engine runs good / great, but while always tinkering with things, I want to check the timing advance, etc. This 383 engine uses a 6AL box and a 8545 MSD...

Hi Guys, While undergoing some quick maintenance on my 66 Belvedere II 2dr, I was lubricating the doors before installing new door panels. However, I noticed that my DRIVERS side door does not latch properly. The latch wheel can ratchet backwards with a solid CLICK, but can be move...

Hi Everyone, When upgrading my door panels on my 66 Belvedere II, I noticed that one door had a chrome strip above the door panel and the other one did not. I need to see if anyone may have this strip (see photo). It is held on with 4 screws, 39" long and sets right on top of the...

Hi Everyone, I have a '66 Belvedere II 2-door Hardtop and want to replace my door panels. The one's have now are mis-matched, so when I take them off for door handle replacement, lubrication, etc....., I would like to have a matched (New) pair to install. In looking at several websites...

Hi Guys.....I am searching for a Hollander Interchange Manual and don't know quite which edition to choose. It appears they release these quite often, and looking at the various editions, I don't want to get the wrong one. I have a 66 Belvedere II, with a 68 Chrysler 383 engine. Some...

I have a 66 Belvedere II, but missing the trunk lift springs. While I did get some springs from a 67 Belvedere 4-door, I am still lifting the trunk manually. I have attempted everyway know to man to place the trunk lift springs in the proper holes & position them so that it will lift the...

As age creeps up on some of these older cars, I find that I want to replace the tail lights and bezels for my '66 Belvedere II. The chrome look has started pitting and doesn't look as good as I want. Alternately, does anyone have any remedy for that pitting? Really looking for anyone...

I am consistently upgrading my 66 Belvedere II and want to change the existing gas cap to a flip cap as seen on several 67 GTX and other cars. I see that Year One offers one for the 67 GTX, but was curious if that would fit on my 66 Belvedere. It looks as if it will work, just needed to see...