Search results for query: *

Hey guys wanting to put my dual snorkel air cleaner on. Question is I have headers now and do not have heat riser hooked up. Do I need the heat riser hooked up for the thermo valve in air cleaner to work or will it have enough heat to operate properly without it. Also I'm running a Holley carb

Hey guys finally getting my tyranny put back in my car. My question is I can't remember if there is suppose to be a bracket mounted on the transmission that the rod goes through coming through the floorboard or if it slips into that casted bracket off the transmission. Also I can't remember if...

ok guys. I have a question on heads for big blocks. I am building a 383. casting number is 2468130-1. The heads that I have on the engine now are 516 heads. casting number 2406516-10. I understand from research that the 516 heads and the 67 only 915 heads are the only closed chamber heads that...

i need to get a transmission for my roadrunner. i could get my stock one rebuilt for around 700 or go with the tci super street fighter. i was looking at just the streetfighter but for another 150 bucks i would be getting a hell of a transmission. just wondering if anybody has used one and...

hey guys. i have a 1973 plymouth roadrunner. i was thinking about throwing a 4 spd in this car. my question is since i have a 727 automatic in it i was wondering if there are holes on the firewall for my pedals. does the 4 speed pedals bolt in the same holes on the firewall as the automatic ones...

what kind of oil is everybody running with flat tappet camshafts. i was told i should run some type of oil with high zinc rating. ive just been running 20 40. what do you guys run

what the hell is up with this. jegs is braided and summit is plastic. what the hell. http://www.jegs.com/i/Lokar/625/KD-2727HT/10002/-1 http://www.summitracing.com/parts/LOK-KD-2727U/?rtype=10

http://cgi.ebay.com/ebaymotors/LOKAR-727-MOPAR-KICKDOWN-CABLE-DODGE-CHRYSLER-KD-2727HT-_W0QQcmdZViewItemQQhashZitem45f2a80f6dQQitemZ300423843693QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

i was wondering if the kickdown linkage is really needed. ive been running for a long time without it and has never had an issue.

http://cgi.ebay.com/ebaymotors/BUDGET-PLYMOUTH-DODGE-727-TRANS-KICKDOWN-CABLE-KIT-_W0QQcmdZViewItemQQhashZitem5887a4a3f5QQitemZ380232836085QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories if so how did it work out and is there anything i should know before i purchase

hey i was wondering which line on the 727 torque flight is the supply and which one is the return. adding another tranny cooler. is the front line off the tranny the supply or return. thanks guys

i cant get my fuel pump to pump any fuel eliminated tank and etc. brand new holley fuel pump. i think my fuel pump rod is worn down but cant find a measurement on it. can anyone give me the length for the fuel pump actuator rod for a 440 Please

anybody ever use holleys 110 gph fuel pump before. i just bought one and havent tried it out yet and was wondering if i can run 3/8 fuel line for it. it says the inlet and outlet is 1/4npt. how do they work for everyone else. i hope there worth the money

i have a 440 with streetfire ignition. 512 lift cam and edelbrock high rise performer intake. motor runs great till around 3800 4 grand then it just dies like it runs out of gas. dont start missing or anything like that it just dies. let outta the throttle and it comes right back to life. i dont...

hey guys. what exactly is the difference between a locker and spool. I always did think the difference was a spool was made for straight lines and the outside wheel could not differentiate in cornering and turns. (Slow up and Speed down) And a locker would differentiate around turns. the collar...

i was wondering what the difference between the 8.75 suregrip which uses clutches to lock up the side gears in the diff and the dana 60. does the dana60 have clutches in it also or is it more like a detroit locker.

my lip seal is leaking on my rearend. how do i go about changing that. pull out driveshaft, take big nut off, pull yoke outta seal, pry seal out and reverse for installation. i hope i can get that nut off and does anybody have any suggestions on how to keep my wheels from turning when i try to...

i had this thread on here b4 i had my motor in my car and everybody said it was probably because the motor was cold and air was leaking past the rings. i got my motor back in and it runs great but when i shut it down you hear a pppppsssssshhhhhh sound from the top of the motor. i know its the...

everytime i crank the motor over i hear a ppppppsssssshhhhhhh sound. like air leaking somewhere. motor runs good when i had it in the car.and i have never done a compression test because the motor is out of the car and i have no way of spinning it over. i just would hate to put the motor back in...

i need a set of motor mount insulators for my rr. has a 383. just need insulators both sides. was wondering if i could buy them at autozone and if anyone has. please tell me part number and how much you paid for them and if that was one or both pair. i really really appreciate it. having kind of...