Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Good Day all,
I have perfect outside condition 68 charger/barracuda gas cap that is missing the spring loaded plunger piece.
Is is possible to remove just the "spring loaded plunger seal" seal section from a poor condition cap and place it on another gas cap that is in great show condition...
Good Day All,
Looking for the part number for the Oil Pressure Sending Unit for my 68 Charger. Pressure reading unit.
I have a parts manual, and usually I am pretty good at finding things in there....but having trouble locating the part number, or a diagram with the part numbered on it...
Good Day all,
Does anyone have pics of the correct spare tire bracket that would be for a 69 Charger...the one that sits in the middle of the tire that the hold down rod attaches too?
Also...any pics or the factory correct dimensions for the spare tire hold down rod, and how is properly...
Hi All,
Small detail…the white plastic clips circled in the photo….originally were they affixed hanging down like in the photo or were they turned up the opposite way?
i am just referring to these 2 clips only and not the rest.
Thanks
macdon221
Good Day,
What was the factory way to attach the poly that goes inside the door between the metal and the cardboard door panel?
I know the poly goes screwed in at the top by the chrome trim...
Is there white rope caulk used down the sides?
Just wide black tape (like duct tape) on the bottom...
Good Day,
What is the proper placement for the yellow/red air filter service decal on a 68 440-4 Dual snorkel silenced air cleaner? The part number on the decal is 2402677.
thanks
I need some schooling on the original green oil filters pre-70. I have seen examples online of course.
First...what were the differences between the part numbers 1851658 (L-72) and 2536186 (L-130)? Were there differences in the size and shape of the two different filters?
Does anyone know the...
I have seen these black plastic wire straps advertised in a few places. But have not seen any examples of such...mostly I am sure because they are hid away behind the battery. Do these go behind the battery on 68 and 69's. Other models? All bbodies...
Does anyone have any photos/links of photos of OE 68/69 voltage regulators?
Looking for examples of the script lettering with the date codes...not NOS replacements.
I did search for a bit but did not see much.
Thanks so much.
Macdon221
Good Day,
For the master restorers out there....
Is there a process out there than can mimic, as close as possible, the original wrinkle finish on the round unsilenced air cleaners?
I do know about the wrinkle spay finish, power coat, etc....but the die hards say that you can really tell the...
Hello All,
Managed to find an original set of these brackets. Cleaned them up. Now I need help with the Original Hardware...Nuts, Washers etc.
Can anyone point me in the right direction for the correct style, markings, etc 6 bolts that are used as well as the washer’s etc if required.
Thanks