John Burns
Member
I'm working on my friend's 1966 and I can't get the speedometer to behave correctly... it bounces all over wildly. I've lubed the cable, cleaned the gears in the speedo, cleaned and re-oiled the wick, and it runs perfectly with a variable speed drill hooked up (and run backwards) at the transmission end. I've had 3 different driven gears in it- the teeth look perfect on all of them. The drive gears machined in the shaft (727) look fine. The only thing I haven't replaced is the speedometer gear housing. There isn't much to one of these- is there something going on with this that could cause this issue?
Thanks
John
Thanks
John