1974 Roadrunner Re-Paint and Some Upgrades

[RR Fan Dan]

Got the Dakota Digital dash today. Pleased with the quality.

 

[RR Fan Dan]

Underside coming along nicely. Body plugs everywhere. Counted 30. Sealing over all but 4. Will weld in 1/2” pipe fittings 304 SS

 

[YY1]

Custom gold stripe?

I know at least one of the major stripe suppliers will do custom colors.

 

[RSMS]

Underside coming along nicely. Body plugs everywhere. Counted 30. Sealing over all but 4. Will weld in 1/2” pipe fittings 304 SS

View attachment 1947774View attachment 1947775
View attachment 1947773

View attachment 1947772

floor looks pretty good in the pictures, are you DA'ing it with 80 grit or??

 

[YY1]

There's a whole thread about sand blasting it.

 

[RSMS]

There's a whole thread about sand blasting it.

I don't think the floors were sandblasted by looking at them.

 

[RR Fan Dan]

floor looks pretty good in the pictures, are you DA'ing it with 80 grit or??

Torch and scrape. Will sandblast to finish. 80 grit glass beads.

 

[RR Fan Dan]

Custom gold stripe?

I know at least one of the major stripe suppliers will do custom colors.

Stripes will be painted. Looking at this now. Green body, orange stripes.

 

[71Beeper]

Dan, will you be installing frame connectors?

 

[DeltaV]

So Matt at Firm Feel wants to thank you guys for increasing his revenue stream today. He highly recommends the aluminum isolators, so they have been added to the invoice.
View attachment 1947214View attachment 1947215

For reference:

Post in thread '1973 Road Runner K Frame Body Mount/Bushing Swap' 1973 Road Runner K Frame Body Mount/Bushing Swap

 

[RR Fan Dan]

Dan, will you be installing frame connectors?

Yes.

 

[RR Fan Dan]

For reference:

Post in thread '1973 Road Runner K Frame Body Mount/Bushing Swap' 1973 Road Runner K Frame Body Mount/Bushing Swap

Thanks for that. Firm Feel ones I got look correct too.

 

[RR Fan Dan]

All the undercoating has been stripped.

 

[RR Fan Dan]

Working on the dash parts all morning. I believe someone used tractor paint on it.

 

[RR Fan Dan]

A little excessive on the trunk seam seal. Will be torching this out and redoing it.

 

[RR Fan Dan]

After input from several members here I decided not to go with the Firm Feel steering gear box. I instead am going with the Borgason. I just got off the phone with Bergman auto craft. They are going to hook me up with everything I need to hook up to my flaming river tilt steering. No cutting required. I got the kit with the pump and hoses as well as a cooler. I also got the kevlar brake shoes and SS PTFE coated brake lines as well as a polished Leeds master cylinder and booster.

 

[DeltaV]

Where are you going to mount the power steering cooler?

 

[RR Fan Dan]

Where are you going to mount the power steering cooler?

Not sure yet. Probably in front of the radiator, as I have a manual transmission so no tranny cooler there.