66 Coronet 500 Driver, Light Resto

[Don Frelier]

Thanks guys. I've been looking at one Kanter sells for 200. I may get a wild hair and go to our pull n pay and get one of the truck swaybars and do it myself, but right now I'm a little overwhelmed with the scope if this project and finite time to get it done.

What about tabs on the arms?

 

[Nxcoupe]

What about tabs on the arms?

Take 1/4" angle iron and cut 2 1" sections, drill holes in each side, either bolt or weld to the control arm.

 

[qkcuda]

I have a pair of Helwig brackets that bolt to the lower shock mount if you want them. They came with the kit, and my car had the ears on the control arms so I didn't use them.

 

[Nxcoupe]

I have a pair of Helwig brackets that bolt to the lower shock mount if you want them. They came with the kit, and my car had the ears on the control arms so I didn't use them.

If I go the do it yourself route, I will reach out, thank you!

 

[Nxcoupe]

Should be picking up the camber bolts in the morning. Work got in the way today, lol. Then went to see Brad Pitt in F1, highly recommend. I got notice from USPS that my lower bushing pins will be here Saturday. Remember it's USPS, I trust that as much as I trust Hunter Biden to not cheat at poker.
My goal for this weekend is to get the front end done and back together, and stainless brake lines going on. Anything more than that is a bonus.