• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

70 Road Runner firewall

beebest

Well-Known Member
Local time
7:35 PM
Joined
Jan 7, 2018
Messages
316
Reaction score
431
Location
Uniontown, Ohio
Any idea what this hole would have been for?
70 Road Runner non ac car.

IMG_20251202_172149345~2.jpg
 
If You took a broader view of the area it would be easier to inform you. Being that it appears to be near the accelerator cable hole I think r413 is correct
 
Thing is what would go through there in that area on a non A/C car? Nothing I can think of.
I've owned many of these 70's.
 
If You took a broader view of the area it would be easier to inform you. Being that it appears to be near the accelerator cable hole I think r413 is correct



Yes close to accelerator cable hole. Similar to AMD firewall, not as large and a bit lower.
 
Looks like accelerator pedal linkage support. Maybe the car was supposed to go overseas?
 
Looks like accelerator pedal linkage support. Maybe the car was supposed to go overseas?
Never knew there was such a thing. I would have welded it shut when I prepped engine bay, but looked factory to me. I'll probably just put a cap plug in it now, if they make them for 1/2 holes.
 
Last edited:
the AMD picture shows a big hole in the front view, an no hole in the rear view

370-1466-back.jpg
front.jpg
 
Last edited:
Column shift car, reverse light is part of wiper harness.
Has tach which may have been added, as grommet hole is just below bulkhead.
 
Back
Top