71 Charger Superbee Tribute/Restomod Build

[70chall440]

Some more

 

[70chall440]

Since my last posts I went through some issues trying to recover the rear seat, the short of it is that I didn't really know what I was doing and essentially was defeated for a few days. Then after thinking it through while working on the headliner in my Challenger I came up with a new game plan which I executed today. Basically I had a bad technique which I corrected and was able to get the back rest cover on. I might work on the bottom tomorrow.

I know I already posed the old seat but I like to see them together. The recover is not perfect but its perfect enough, those creases in the left side (as you are looking at it) I steamed out somewhat.

 

[70chall440]

So I was able to recover the bottom of the back seat, in this case though I just reused the foam. I am not super happy with the creases and such but we are due to get some hot weather this coming week and I am going to put both parts out into the sun for awhile and see if that helps. If not I will remove the cover and work on stretching it some more, I will also put a 1/2" more of foam onto the top of the bottom seat.

 

[T2R9]

Looks great! The sun will settle it in.

 

[70chall440]

Looks great! The sun will settle it in.

I hope so, but if not I have options, I just ordered a 1500 watt steamer

 

[70chall440]

As promised I set those seats out in the sun and it helped a lot, so much so that I will be using them as they are.

On another note, the 572 Hemi Roadrunner is on its way to Australia, it was picked up yesterday and in on its way to long beach CA.

 

[70chall440]

I also made some improvements to my 70 Challenger;

Got the headliner tightened up some, still have a couple issues but it is what it is at this point.

Cleaned up the under hood wiring which I have been meaning to do for a long time.

I had to order some new parts such as A pillar covers, door handles, shoulder belt clips, etc.

 

[Austin Charger]

I also made some improvements to my 70 Challenger;

Got the headliner tightened up some, still have a couple issues but it is what it is at this point.

Cleaned up the under hood wiring which I have been meaning to do for a long time.

I had to order some new parts such as A pillar covers, door handles, shoulder belt clips, etc.

View attachment 1663491View attachment 1663492View attachment 1663493View attachment 1663494View attachment 1663495

Headliners can be a REAL pain. In the head, neck, shoulders, arms, and ***.

 

[70chall440]

View attachment 1663584 Headliners can be a REAL pain. In the head, neck, shoulders, arms, and ***.

I've done a few of them now but when I originally did the Challenger that was my first and I didn't know what I didn't know. Now I can get one pretty tight and looking good especially since I just bought a steamer.

 

[70chall440]

I decided to see if I could build some bolsters in the stock seat covers. I reused the old foam from the frames but these were actually 70 Challenger seats so the foam was different than a 71 Charger, I modified it to make it work.

The end result is a very tight seat and it does have more pronounced side bolsters but I am not sure if they are enough. I am going to finish both buckets and will make a decision once I get to that point.

 

[Rennkafer]

This I'll be interested to see, I got a pair of factory buckets with the Satellite, but they definitely need more bolster.

 

[70chall440]

I've just started on the back rest for that bottom, we will see how it turns out.

 

[70chall440]

So here is the back part of the drivers side bucket. I now have to do the passenger side seat plus put all the hardware back on them.

Keep in mind that the seat was originally out of a Challenger and the foam is different as is the side wires and overall design. The frame is the same but the foam and cover are different. I had to basically glue the old foam together (2nd pic) and then recut the slots for the listing wire (one on each side and one across the top). I have added 1/2" of foam to this seat back with another 1/2" on the bolsters. It is not a massive improvement I don't think but it does push the bolsters up some, enough I hope to make a difference in butt/back slide elimination.

 

[70chall440]

I was able to put the seat out in the sun for a bit which did soften up the wrinkles and make them less obvious but I am perfectly fine with how the seat is not.

I got the seat put completely together to include the runners and am happy with the result, now to do the passenger side.

In reference to the "enhanced" bolster plan, well I was able to put the seat onto something and sit in it just to feel it. I cannot say that the bottom is really that enhanced, a tiny bit perhaps, however the back is better than in stock form and does cradle your back somewhat. Nothing that I would used for repeated road racing or auto crossing but for normal driving they should be good.

On that note and for anyone looking into doing this (adding foam to the bolsters), I will say right now that I would go 1 to 1.5" on top of good foam on the bolsters. I added 1/2" across the entire seat and then another 1/2 on the bolsters but this is with used foam, so new foam would probably yield much different results. On my seat I sincerely believe I could have stuffed another 1/2" in there although it would have been a larger fight to get the cover on and secured.