Are '73 Charger torsion made of unobtainium?

[Hilljack68]

That's just weird! I checked PST, Mancini's and Summit Racing. None of them list a single torsion bar for the '73. On each website, I punched in my '68 Coronet... boom, there they are! Any one else finding this? I mean, they're not even listed as "out of stock".

I believe the highest sales numbers for the old Chargers were 73/74, so you'd think they'd be offered on all the major sites.

Are you guys finding them anywhere?

 

[70chall440]

Firmfeel Mopar Suspension and Steering

 

[T2R9]

Sway Away makes them

 

[j-c-c-62]

I thought 73 B up used a goofy hook style TB or is that F body, nothing like 72 and down stuff, and if so, likely why OP cannot locate, meaning it has nothing to do with material so much as design differences and lack of market demand.
Please Correct me if I am wrong here

Edit yes I am apparently wrong, the linked Firm feel site lists 73 b body bars

 

[hanks73340]

Try Magnum Force

Magnum Force Mopar Torsion Bars

Also, 1973 had the highest sales of Chargers out of all the Charger Generations. I do believe it was over 118,000

 

[Hilljack68]

Ok, Magnum Force may have just explained it. If I'm reading it correctly, the same 41" bars fit all 66-74 B bodies and all E bodies.

 

[Cop car wagon]

66-72B 70-74 E
73up B are longer

 

[#41]

Ok, Magnum Force may have just explained it. If I'm reading it correctly, the same 41" bars fit all 66-74 B bodies and all E bodies.

That is wrong. 73-74 bars are longer.

 

[T2R9]

73 up bars are 43.5" 72 down will not fit. Added a link for my comment above.

TORSION BAR SET, DODGE 43.50" LONG X 1.08” DIA

SKU 4841 Categories: 1973-1981 "B" Body, Dodge, MOPAR Torsion Bars, Torsion Bars Sway-A-Way’s high-performance 43.50″ long torsion bars designed for 1975-1981 MOPAR B body vehicles.

sway-a-way-inc.odoo.com

 

[Hilljack68]

So apparently, their website needs fixed:

 

[Takoctopus]

Stock

 

[Nacho-RT74]

As far I recall, SB TBs 73 and lates are 0.92” while BB are 0.96”. Larger diameter than earliers due the extended lenght for the divorced TB rear Crossmember.

 

[Nacho-RT74]

I got the 1.06” FIRM FEEL T Bars for my Big Block and honestly I could be happy also with the 1” Bars. Thicker makes raise a lot the front end with barely move the adjusting bolt. Better not too thick for a fine adjustment

 

[Sparky Anderson]

Listen to the people who bought from firm feel, I bought a pair of torsion bars for my 73 Plymouth and very happy with results. I would buy again if I had from them, can't go wrong.