greymouser7
Active Member
Rich, I don't know if this data helps, but this first link is the opposite of our dilemma (B-body 833 into A body) and it has some measurements (while I am waiting at work):
http://www.bigblockdart.com/techpages/abconv.shtml -not so hot
http://www.allpar.com/mopar/transmissions/four-speed-manual.html -not bad
http://www.slantsix.org/articles/4-speeds/ODA833fourspeed1.htm -great stuff
http://www.darkside.ca/node/31
a quote from Moparts:
"Might want to revisit the shifter locations on a long vs short tailshaft A833.
A body shifter mounts sit farther back then B body shifter mount locations."
http://www.bigblockdart.com/techpages/abconv.shtml -not so hot
http://www.allpar.com/mopar/transmissions/four-speed-manual.html -not bad
http://www.slantsix.org/articles/4-speeds/ODA833fourspeed1.htm -great stuff
http://www.darkside.ca/node/31
a quote from Moparts:
"Might want to revisit the shifter locations on a long vs short tailshaft A833.
A body shifter mounts sit farther back then B body shifter mount locations."
Last edited: