PlyGTXSat
Active Member
Got a edelbrock intake on my 340 that works perfect but is a little rough to look at. How are you guys cleaning up your intakes? Do i need to remove it and how complex are they to reinstall?
Did you do it on the car?I used Napa's aluminum brightener in the spray bottle...intake came out looking like new just gotta be careful it's strong stuff. Use only as directed..
No, I had it off at the time, but if you throw some plastic on the motor or towels or something to protect stuff I don't see why you couldn't do it with the intake on the engine.Did you do it on the car?
How hard is it to pull off and put back on?Do it once and do it right! Otherwise any cleaning efforts you put in now will just have to be repeated again and again. Aluminum is VERY porous and absorbs all kinds of gunk over the years -- fuel, carb cleaner, etc. (that's where all the staining and discoloration comes from). Consider how much your time is worth and compare that against a couple hundred bucks getting it restored. Here's a few selections ...
View attachment 718682 View attachment 718683 View attachment 718684 View attachment 718685 View attachment 718686 View attachment 718687
... and a couple Before & After shots ...
View attachment 718692 View attachment 718691
View attachment 718694
View attachment 718693
You also get a FBBO discount.
How hard is it to pull off and put back on?