Doctor Diff question.
- Thread starter 70Hemi-RR
- Start date
- Local time
- 6:46 PM
- Joined
- Jan 29, 2018
- Messages
- 21,554
- Reaction score
- 68,405
- Location
- Midland Ontario, Canada
I'll say it again, sole proprietor operation.. email rocks. He had 10 spare minutes, probably while eating his lunch and got back to you, vs being interrupted setting up a set of gears by the phone ringing.
JARRETT LYNCH
Well-Known Member
I'm sorry but you can't be that busy selling Mopar parts lol.
I'll share my experience here. I ordered the bearing kit for a 742 carrier rebuild. It states on his website "Timken USA" bearings. Well, the kit arrived today.
No USA marking anywhere, and the one race was labeled "India". I texted him and asked what gives? He claims the bearings are made in USA.
So let me get this straight - Timken stopped labeling their bearings USA, but are still made in USA?! What a line of bullshit.
He offered to replace the race from India - this was after he asked that I send him pics. Which I did, but doesn't HE know what he's selling?
Doctor Diff will never get my business again. If I wanted global Timken products, I would have ordered from Amazon (cheaper) and got 'em the next day - not eight days later through USPS.
Rant Over.
No USA marking anywhere, and the one race was labeled "India". I texted him and asked what gives? He claims the bearings are made in USA.
So let me get this straight - Timken stopped labeling their bearings USA, but are still made in USA?! What a line of bullshit.
He offered to replace the race from India - this was after he asked that I send him pics. Which I did, but doesn't HE know what he's selling?
Doctor Diff will never get my business again. If I wanted global Timken products, I would have ordered from Amazon (cheaper) and got 'em the next day - not eight days later through USPS.
Rant Over.
gkent
Well-Known Member
You sound like the kind of customer nobody misses !
- Local time
- 3:46 PM
- Joined
- Apr 13, 2012
- Messages
- 41,129
- Reaction score
- 148,566
- Location
- Granite Bay CA
I agree.
Some vendors sell stuff that they do not actually have in their own stock, the parts often are shipped through a distributor. Maybe Cass didn't know that his supplier had substituted a part?
Dr Diff will never get my business again!
Some vendors sell stuff that they do not actually have in their own stock, the parts often are shipped through a distributor. Maybe Cass didn't know that his supplier had substituted a part?
Dr Diff will never get my business again!
I don’t think Cass is worried.
apologies for not updating this sooner. Nothing against Dr. diff but the email only just didn’t work for me. I spent 15 minutes on the phone with a Strange tech and 2 weeks later it’s sitting in my shop. Like I said, nothing against the guy I’m just old school and want to talk not email.
padam
Well-Known Member
Just an FYI,
Timken probably isn’t making automotive bearings in the USA anymore.
Edit:
I think the ideal replacement for Timken bearings would be Japanese or German made. But I don’t know if they make them.
Last edited:
- Local time
- 5:46 PM
- Joined
- Dec 4, 2009
- Messages
- 38,823
- Reaction score
- 54,777
- Location
- Pasadena, Texas
Mondays are usually a slow day anyways.......You have plenty of time to post on an old fart Mopar forum.
TN Mopar
Well-Known Member
My experiences with Dr Diff have all been very positive
Not a rear end but I did order a Strange driveshaft kit
it came in fast, was affordable and fit perfectly
Cass has also been a great resource when I was swapping to a dual Master and disc brakes
Not a rear end but I did order a Strange driveshaft kit
it came in fast, was affordable and fit perfectly
Cass has also been a great resource when I was swapping to a dual Master and disc brakes
Why were my posts deleted?
Mine too. Cass helped me on my 8 3/4 and the purchase of my Strange S60 and little bits in between.
How much damage did that thing do to your car?
- Local time
- 6:46 PM
- Joined
- Jan 29, 2018
- Messages
- 21,554
- Reaction score
- 68,405
- Location
- Midland Ontario, Canada
Best I can see... they weren't !
TN Mopar
Well-Known Member
A bit
I was lucky in that it was up on a dyno at the time
and the shaft was slung down striking the shop floor
It took out the 3" exhaust system with 1 electric
broke both yokes and the pinion bearing
the shaft put a small dent in the floorboard that was easily beat out (it didn't have to pretty)
Sounds like you got lucky, it could have been way worse.
Similar threads
