• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Exhaust manifold to head gaskets

hoover

Well-Known Member
Local time
4:53 AM
Joined
Aug 3, 2017
Messages
224
Reaction score
247
Location
taylors falls mn
I know they did not have a gasket from the factory.

But,
The gaskets i have are way too big in the port area. There would only be a tiny area of gasket between the flange and the head surface.

These came with the complete kit i bought from 440 source.
What are you guys using for gaskets?
 
beerestoration2017 315.JPG
 
Worked at Mopar back then, never used any, resurfaced exhaust manifold if pitted up. Had to remove a lot of someones gasket that were leaking!!
 
Auto Transport Service
Back
Top