Help ID these 440 rods

[Ben Treinen]

Need help IDing these rods out of my 440, tearing down my motor home 440 out of my GTX due to poor engine build resulting in rod bearing failure, trying to do do this as well as I can for my first build. Thanks!

 

[RemCharger]

Never seen one of those.. what is that, a cheetah? Greyhound,, kangaroo lol....
I'd consider getting some LY's

 

[RTDaddy]

A pic of the other side of the rod for part #?

 

[pnora]

Need help IDing these rods out of my 440, tearing down my motor home 440 out of my GTX due to poor engine build resulting in rod bearing failure, trying to do do this as well as I can for my first build. Thanks! View attachment 1938973

Maybe Scat brand rods?

 

[jamey]

Cat brand would be my guess

 

[dodgeboy440]

Need help IDing these rods out of my 440, tearing down my motor home 440 out of my GTX due to poor engine build resulting in rod bearing failure, trying to do do this as well as I can for my first build. Thanks! View attachment 1938973

Looks like all aftermarket

KB pistons

CAT rods

Decent parts IMO

Depends how it was assembled & treated !

Hopefully you can save them …..

Mopar2ya!

John

 

[1 Wild R/T]

Scat's logo looks nothing like the logo on those rods....
Cat's logo doesn't either...
I have no idea who's logo that is, they don't look very beefy or particularly well finished... I would probably trust a set of LY's over those particularly if a rod bearing has already spun in one of them... What size are the rod bolts?

 

[Ben Treinen]

A pic of the other side of the rod for part #?

Totally bare on the other side

 

[Ben Treinen]

Never seen one of those.. what is that, a cheetah? Greyhound,, kangaroo lol....
I'd consider getting some LY's

Probably going the stroker route was going to save these thinking they were Scat, at least the pistons can be IDed

 

[Ben Treinen]

Scat's logo looks nothing like the logo on those rods....
Cat's logo doesn't either...
I have no idea who's logo that is, they don't look very beefy or particularly well finished... I would probably trust a set of LY's over those particularly if a rod bearing has already spun in one of them... What size are the rod bolts?

Rods have 3/8 studs marked A1