In response to the below, offensive? So sorry you read it as offensive. Feeling Guilty of something?
Are you refering to my post with the flawed thinking???:angry1:
Now that I've read your post again, I'm sure your retoric comment was in fact directed towards me. I can say for certain that my post in which you comment "It is a no brainer in what you say" certainly shows quite the opposite in your own words in a previous post. This is in fact why I made the statement.... Again, A solid flat tappet camshaft is most commonly ground with a higher rate of lift do to it's mechanical abilities DIRECTLY resulting from the solid lifter design and abilities itself.
When I post to a member "other than you" a design characteristic, why would you feel compeled to argue against it, then a few posts later say I'm stating the obvious, and that I should spend more time in a Dyno room, and also insinuate that a good read that I referanced was claimed as Gospil, and further more, used as ammo????
Re-think your words and try again..... If your objective is to find someone to disslike you personaly, then your on your way.... Why would anyone do this????
While I'm thinking about your words rumblefish,,,, Before making agusations on someone else’s knowledge by implying he or she has "flawed thinking" you should first understand who it is your speaking to. I do NOT have flawed thoughts,,, and you should understand that I have spent a lot of time and money earning multiple degrees, one of which is automotive technology mechanical engineering, and the other in electrical engineering specializing in robotics which I use every day working with companies such as Kraft Foods, Kimberly Clark, Johns Manville,, the list goes on... I am paid for my knowledge and design projects worth millions of dollars each. You border line on being grossly offensive when you choose to make such remarks directly towards an individual. And yes,,, my remarks are now directly pointed towards you and I'm certain rightfully so..... I will now digress from this conversation, but not without letting you know that your words were un warranted and un called for.
LO< I'll tell ya what, we can argue this else where and after I prove you wrong and show you the way and fix your thinking, you can first apologize to the OE poster for your mis-information and then, if your nice, I'll let you come to the family shop. If your nice, I'll let you touch the Wally's on the wall.
Sorry Sweet,,, I was just coming in to the forum to apologize for the rebutal towards the un needed remarks.
Your right, I should have sent a PM with my concerns regarding the issues.
Once again,
Sorry for using your thread as a means of putting someone in there place. It will not happen again...
Happy Moparing and I wish you the best with your camshaft choice......
YOU, put me IN MY PLACE!?!?!?!?
LMFAO at the ridiculous thought of some ill conceived thought from a wanna be motorhead internet hero.
(Now there is your insult to hate me on and the only one I wrote worthy of it all.)
The true problem here is;
1. Your convinced
2. Your not thinking this through
3. You assume to much about camshafts
4. You assumed wrongly about myself on multi levels
5. You think I insult you for what ever reason
6. I insulted you once and only once. You read my reply wrongly.
You degrees from this convo? OK, we'll just agree to disagree. Hate me if ya want, I really do not care. Once you actually do some homework and not just enuff to cover or prove your point of view or support what you believe to be true, then you can come back to this topic and say, yep, that guy was right. Not all solids are ground to be more aggressive than Hyd. cams are. There are Hyd. cams more aggressive than solids.
You'll be saying,
"retoric comment" was from yourself, not me. just making use of the words, "retoric comment" just proved to me you didn't do your homework.
Go ahead, look, you'll find it.
Have a good one bro.
To the OE poster, do your homework, not just internet guru chats on what they think and believe to be the best. I'm not here to start chit, but to offer help in getting you the right information to what is
actually out there.
Not just what is listed in the catalogs and there semi hidden back pages.