Dan64
Well-Known Member
Ok so this isn't a race car but i'm asking this here because this seems to be where the engine builders are . I'm looking for input as to which brand you guys have used and would use again on the right build. Comp , morel, Howard's ( which may be just be morel) Trick Flow ( which may be Howard's which may be morel) or Gaterman . Quick run down on engine. 493 ,10:1, Trick Flow 270 ,Indy plane d.p.m.max wedge. Carb not bought yet but thinking Brawler 850 ?. Cam is Erson hyd.roller 250/258 @ 50 ,110, .548 lift but will use Harland Sharp 1.6 on the intake so should be around .600 .2" TTI 's with 3" full exhaust. I understand that most of you guys build with solid rollers or sft cams as you are building for max hp. This car will be street driven to shows/cruises and maybe see the track a couple of times a year. The original goal was for around 625+ hp and torque. Any help or advice is appreciated.
Last edited: