Anyone have good or bad experiences from Jethot coatings. Was going to have some headers and exhaust coated at there North Carolina outlet. Thanks in advance.
Jethot coatings
- Thread starter Don selleck
- Start date
Don,
I had a set of headers done at the same facility over 5 years ago and they still look new.
no heat blemishes at all.
The headers where new and made from non polished stainless.
Bill
I had a set of headers done at the same facility over 5 years ago and they still look new.
no heat blemishes at all.
The headers where new and made from non polished stainless.
Bill
Thank you, I always heard good things about them but was reading thru a thread here where some had issues, I have heard that if your engine runs hot it may damage the coating, hoping to reduce the under the hood temps also.
I used them years and had no complaints. My brother and I have also built headers for a few cars and had them coated by Jethot and were happy with the results.
mmissile
Well-Known Member
QC Coatings in Shelby Twp. Mi.
Best I've seen, and they stand behind their work. Headers are coated inside and out, and this is not a production powder-coating shop.
They've done all my exhaust/headers for the last 20+ years. Bill and his guys are friendly, knowledgeable, and car guys.
All my powder-coating is done there, as well. If i isn't right, it doesn't leave.
They are on FB as well....
Home | QCCOATINGS.com
This is the last set they coated for me, for Krusty....
Best I've seen, and they stand behind their work. Headers are coated inside and out, and this is not a production powder-coating shop.
They've done all my exhaust/headers for the last 20+ years. Bill and his guys are friendly, knowledgeable, and car guys.
All my powder-coating is done there, as well. If i isn't right, it doesn't leave.
They are on FB as well....
Home | QCCOATINGS.com
This is the last set they coated for me, for Krusty....
Last edited:
Slipping727
Well-Known Member
Had a set of headers coated and it made a huge difference in underhood temperature.
After a few years they still looked nice but the thermal properties must have worn out and the high underhood temperature returned.
After a few years they still looked nice but the thermal properties must have worn out and the high underhood temperature returned.
I've had bill do alot of work for me on my last project great guy, no b.s. ever. I knew of the powder coating and ceramic work he does, what I understand from the jet hot process is that its a thicker coating, for more heat insulating for under the hood, I will have to call him and see what he says. thank you.
interesting, thanks for the comment.
Similar threads
