Hammer108
Well-Known Member
I’m replacing the single MC for a dual unit.
Do I reuse the rod from the pedal to the old single MC?
I ask because the rod will not slide into the back of the new MC. Plus there are no bolts holes in the new adaptor plate to hold the bracket from the old MC.
1st pic is of rear of old MC
2nd is pic of new MC and brake rod.
3rd is the rod itself
Suggestions on using the new MC or do I do back to the old single MC.
Dr Diff sells a new rod but it’s for 66 and up. Mines a 1965 Coronet.
Suggestions?
Do I reuse the rod from the pedal to the old single MC?
I ask because the rod will not slide into the back of the new MC. Plus there are no bolts holes in the new adaptor plate to hold the bracket from the old MC.
1st pic is of rear of old MC
2nd is pic of new MC and brake rod.
3rd is the rod itself
Suggestions on using the new MC or do I do back to the old single MC.
Dr Diff sells a new rod but it’s for 66 and up. Mines a 1965 Coronet.
Suggestions?