- Local time
- 10:36 AM
- Joined
- Dec 25, 2011
- Messages
- 5,275
- Reaction score
- 6,378
- Location
- White Cloud, MI
Hi fellas,
I made this with a 1/2" bolt and a split pin that fit the notch in the heater nipple. Should work good on a new install but, not having tried yet, I don't know if the split pin will hold up for removal of old nipples. I may have to buy a hardened pin to make it tough enough.
Mike
I made this with a 1/2" bolt and a split pin that fit the notch in the heater nipple. Should work good on a new install but, not having tried yet, I don't know if the split pin will hold up for removal of old nipples. I may have to buy a hardened pin to make it tough enough.
Mike